32degrees spring kit

[QRFleader]

Is there a guide somewhere for what I can do with the spring kit?

[Ares]

its for adjusting your velocity. if you have slow velocity, put a stronger main spring in. if you have high velocity, put a lighter main spring in

[OtterSC]

Valve spring replacement:
strong spring = lower velocity
medium spring = stock spring velocity
weak spring = higher velocity

Main spring replacement:
strong spring = high velocity
medium spring = stock spring velocity
weak spring = lower velocity

[QRFleader]

thank you thats exactly what I was looking for, I exparamented with it yesterday and put the strong spring in both the main and valve, with the velocity adjuster backed off to its lowest settings it was shooting at 350.

needless to say we put the med spring in the back. ive at about 270 now.

I wm going to try different combonations until I find one I like.

Thanks again

[BallerX]

Originally Posted by OtterSC

Valve spring replacement:
strong spring = lower velocity
medium spring = stock spring velocity
weak spring = higher velocity

Main spring replacement:
strong spring = high velocity
medium spring = stock spring velocity
weak spring = lower velocity

Definatley keep those combinations in mind too. The weak Valve Spring combined with the strong Main Spring will have a mich higher velocity then just the strong Main Spring.

Just experiment until you can get that velocity dialed in.

[QRFleader]

ran with the med val;ve and main over the week end and shot at 270 aveerage, my fps did drop throught the day (new spring) I am trying a different combo now to see how it works

[DexGtr]

Originally Posted by QRFleader

ran with the med val;ve and main over the week end and shot at 270 aveerage, my fps did drop throught the day (new spring) I am trying a different combo now to see how it works

i'm sorry but if you're using both med springs....then you're basically back to stock spring configuration, and didn't change anything.

light valve and light/med spring works better IMO since it lessens the kick too.

[QRFleader]

Im running the heavy in the rear and the med in froint right now, but I will try the light med combo, thanks for the sugestion

[QRFleader]

lol Im still triying different combos to get the feel and the responce I want

[ooglieboogliebob]

hmm .. really ?? .. is ur gun set to low pressure ?? .. if not i'd put hard mainspring and light valve spring