MR2 - ACS Not working at all even with Halo B!!!

[PandaTruenoGTS]

My MR2 is completely stock, but the "anti-chop system" bolt chops more paint than I have ever seen in my life. So far I have shot: Scorche, Diablo Heat,and Evil Midevil paint. The Evil paint matches the barrel fine. No matter what I use whether it be Semi, burst, or full auto I might get 6 clear shots and it chops so hard the inside of the halo b was full of splatter. Usually it chops so hard the gun will no longer feed. I even tried using semi and shooting slowly and it still chops at around the 8th ball or so. I can't figure it out at all. According to the instruction it will chop unless you have a loader capable of 12-13 bps, so I bought a TSA.. chopped paint... so I borrowed a halo b, chopped even more paint. Also note that I tried it with the velocity up high, medium , and all the way down. I'v tore it apart and cleaned it everytime it does this and went by the instruction that claim that the only oiling to be done is through the air inlet. If no one can help me resolve this problem I'm going to send it back to kingman and demand a full refund for the gun and the barrel I had to buy cause the one I wanted wouldn't fit. This isnt acceptable for a $250 gun. Some might say "well $250 is still a cheap gun", but I could give you this gun and beat you with a $30 talon pump because by the time you squeeze off 10 rounds I could run up on you and get you with one shot while your taking the time to clean the whole gun.

[Santy]

the acs bolt has to be broken in first, thats why u're chopping, either stick a swab in the feedneck and fire about 1000 times, or save air and take the bolt out and just push from both ends about 1000 times, depressing the spring inside and breaking it in

[DRAGON]

Geez, get your panties out of a bind. Break the bolt in and HALO's push the balls past the detents in a lot of markers. Get a Zeggo and it will keep up with the rof and not force balls past the detents -

[PandaTruenoGTS]

yeah after posting I went to the electra forum and read about it there. Thats what I was thinking but the thought never really crossed my mind about a break in period, i thought maybe the spring was just defective cause when I put my finger in there it seemed like it was hitting way too hard. time to find out if I can count to 1000 (haha) Thanks for the help though, I really love this gun, I'm glad its something simple cause I really would like to keep this marker. Thanks!

[DRAGON]

BTW....welcome to the forums and if you have any other Q's, don't hesetate to ask here. There's plenty of people that can guide you in the right direction -

[PandaTruenoGTS]

this is good finger exersize.. haha, and thanks for the welcome note, sorry to have sounded so uptight in the first post, but how easy is it to get aggrivated when you spend your hard earned money on something and cant figure out why it doesnt work? im sure you know where i was comming from but thanks again!

[Voodoo27909]

Im not sure that I buy into the whole "Needs to be broken in" theory. Im more inclined to point toward the detent as the cause. I bought two of these markers myself...and have the same issue with any electronic hopper on both MR2's. The detent is allowing a double feed into the barrell...the only thing that is going to fix this is for Kingman to come out with a better detent. Warranty...right??

[DRAGON]

that's a possibility. they have the old style rubber nubby detent right? -

[durrell]

Originally Posted by DRAGON

that's a possibility. they have the old style rubber nubby detent right? -

I figured they had the ball style detent, not positive.

[nitrobassboats]

is rubber detent nubby u r correct dragon
\nitro