Spyder Forums  

Go Back   Spyder Forums > General Spyder Discussion > Veteran Forum
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 01-15-2006, 10:26 AM
Team Ramrod's Avatar
Team Ramrod Team Ramrod is offline
I Like Me
 
Join Date: Dec 2005
Location: Canukland
Posts: 719
Default Cocker Reg on spyder

ok, are there any mods i should do before i attempt this? i know the max output on the reg is prolly around 600psi so it could be high enough to run the spyder. i got a new reg for my cocker so i figured its worth a shot for a bit of performance, otherwise it'll just sit in my toolbox.
also how far can i turn out the reg? you have to take off the bottom to do so, so i would like to have it turned out from the start to save on time and effort. will it just stop or will it be like my cp reg and the screw will come all the way out?
thanks in advance.
Reply With Quote
  #2  
Old 01-15-2006, 11:38 AM
shunut's Avatar
shunut shunut is offline

Respected, period.
 
Join Date: Dec 2005
Location: Gilbert, AZ
Posts: 5,355
Default Re: Cocker Reg on spyder

If you are talking about a ergo reg there is a clip that prevents it from being unscrewed all the way. With the clip out the screw will come out all the way. As for your Spyder running at 600 psi, that might work, you'll just have to give it a try. If it isn't recocking or you can't get your velocity up with the reg turned all the way up to 600psi there are some small things you can try that aren't too expensive. First if you haven't already done this polish your internals, as seen here on Otter's Site. If you've done that or if that doesn't help you can try a higher flowing valve and/or a spring kit. Hope I helped some.
__________________
Viva La KUSA!

KUSA Feedback

2006 Non-Spyder of the Year - The Shunut Spimmy


Shunut Creations
Reply With Quote
  #3  
Old 01-15-2006, 11:39 AM
bigred76's Avatar
bigred76 bigred76 is offline
Resident *******
 
Join Date: Dec 2005
Location: San Jose, CA
Posts: 6,227
Default Re: Cocker Reg on spyder

Stock 'Cocker regs went up to 800psi, I thought....Looks like 'Nutty got the rest tho.
__________________
SOC (+41, -0) | PBN (+12, -0) | New PBN (+20, -0)

URT... Ultimate Resource Thread!

The [OFFICIAL] Manual Thread!

BigRed Photography

Quote:
Originally Posted by Muddy Taco
ya my vagina hurts sometimes to
Reply With Quote
  #4  
Old 01-15-2006, 12:13 PM
Ares's Avatar
Ares Ares is offline
shake shake shake shake shake shake
 
Join Date: Dec 2005
Location: delaware
Posts: 496
Default Re: Cocker Reg on spyder

yea cocker regs go to ~800. i put 1 on my spyder all the way opened and it was teh same velocity as before
__________________
i shoot mags
Reply With Quote
  #5  
Old 01-15-2006, 04:32 PM
Team Ramrod's Avatar
Team Ramrod Team Ramrod is offline
I Like Me
 
Join Date: Dec 2005
Location: Canukland
Posts: 719
Default Re: Cocker Reg on spyder

yeah, its a stock '04 cocker reg, forgot to put that on the original post. so the pin wont come out when i open it all the way out? if it does should i just put it in enough that it holds (plus another half turn for good measure) and that'll be around 800psi?
and yes ive already polished my internals, and penny (nickle mod on the old boards) my solinoid becuase i lost my charger.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 10:27 AM.