Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 12-20-2006, 07:31 PM
toxtrem toxtrem is offline
Just 4 the PAIN of it
Join Date: Dec 2006
Posts: 28
Default Remote???

What are the best remotes for the pilot acs?
Reply With Quote
Old 12-20-2006, 07:35 PM
PWNDuAgain's Avatar
PWNDuAgain PWNDuAgain is offline
Join Date: Oct 2006
Posts: 89
Default Re: Remote???

don't use a remote on a Spyder Pilot. That is not a scenario type gun.

But I guess if you must a PMI remote is pretty good. I use one on my Tippman.
Reply With Quote
Old 12-20-2006, 07:37 PM
bamf-hacker's Avatar
bamf-hacker bamf-hacker is offline
Bling Bling Bling
Join Date: Dec 2005
Location: In your PC...
Posts: 5,941
Default Re: Remote???

PWND, it is not about the type of gun. I used a remote on my Rodeo to take the weight off the gun.

If you want a remote, make sure to get one with a slide check. That way you can remove the remote hose easily.
Originally Posted by TheRedBarron
secks comes to mind everytime I look at those markers. pure freaky secks.

You have been roshamboed
Reply With Quote
Old 12-20-2006, 07:37 PM
Hob Hayward's Avatar
Hob Hayward Hob Hayward is offline
not a nublet, sheesh.
Join Date: Feb 2006
Location: MA
Posts: 2,848
Default Re: Remote???

Remotes are good for ALL guns if you use co2.

Really the brand doesn't matter, just look for the cheapest one you can get, they're basically all the same.
05 Imagine
Palmer stabilizer
Maddman Rocket valve
Trinity Front block
IPS Sunbear Bolt
Dark Horizon titanium striker

Green/silver VSC CCI Phantom

Red/Black PMR SE
Reply With Quote
Old 12-20-2006, 08:21 PM
toxtrem toxtrem is offline
Just 4 the PAIN of it
Join Date: Dec 2006
Posts: 28
Default Re: Remote???

Is the micro any good or would you stick with the full size coil?
Reply With Quote
Old 02-24-2007, 03:20 PM
dynastykiller08 dynastykiller08 is offline
Join Date: Feb 2007
Location: ohio
Posts: 208
Exclamation Re: Remote???/Mr2 problem

first sorry for opening a old thread but i thought it would be better than opening a new one on the same subject...but i have a few probs...first how do i take the remote hose off the gun without lettig all my c02 out please explain in detail as i have tried (dont know if i done it wrong but i lost alot of air and hose was goin everywhere) that is my first problem

now for my second... is the biggest problem i have a mr2 and some guy next door i was out shooting with was showing me some stuff on my gun (because he "knows markers" and he adjusted my little knob right under my stock (im assuming this is the velocity ) and he turned it clock wise alot...and it shot well for a whole hopper full then i had to recock and pulled the trigger and got a rapid fire like it was in auto (it wasnt) and then it uncocked and it keeps doing this i turned the velocity back down all the way and it still does it thanks in advanced and PLEASE HELP ME
Reply With Quote
Old 02-25-2007, 09:04 AM
Pwgsx's Avatar
Pwgsx Pwgsx is offline
300 fps
Join Date: Nov 2006
Posts: 400
Default Re: Remote???

you cant save air in the remote line when you disconnect it from the gun. The only thing you can do is turn the on/off knob at the bottle to off and shoot the remaining air that is in the line.

Not knowing about that model gun, and if it was the velocity adjuster, it sounds like you are low on air. The more pressure that is put on the main spring from the adjuster, the more are it will take to re-cock the gun.

The valve and valve spring also plays into this as it limits the amout of air that enters the gun but I would not touch that unless you plan to go LP.

next time start a new thread they usually dont like bringing back old ones.
LP Spyder Pilot 250psi Stiffi Barrel, NDZ Valve, Palmer Stab., Assault Block, Spring Kit, T-Board with Eyes.

Feedback: http://www.spyder.tv/forums/showthread.php?t=9477
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -8. The time now is 10:11 PM.