|
|
#1
12-17-2006, 06:03 PM
|
||||
|
||||
Dragun problems
I have a dragon marker(spyder clone) that works great for like 2-3 games then it sputters like it is out of air. I can take it apart wipe it down and re oil it and it will work for a few games and do it again. I have completely disassebled it soaked the body in hot water wiped it out let it dry and reoiled and put everything back together and the problem keeps coming back. anyone have any ideas
edit-- the bolt is aluminum and rear cocking seems to slide freely.
__________________
Dragun T-1-clamping feedneck,Torp hpr,Micro-Rock LPR. Pilot ACS-Low-Blow bolt,cocker feedneck,T-1 Hpr, turbo valve,polished DragunFly-T-1 LPR,T-1 HPR Dragunfire-TES Hpr,Polished Rebel-Half-backed(by me) E99 Xraider Black LCD Fasta Feedback Last edited by Halucin8 : 12-17-2006 at 06:17 PM. 
|
|
#2
12-17-2006, 06:35 PM
|
||||
|
||||
|
Re: Dragun problems
Sounds to me like it might be sear wear. OR, it could be that your frame is working itself loose - you might try tightening the screws to see if it'll tighten up a little.
Are you using Co2 or HPA? Another thing, try relubing the regulator - Dragun regs get kinda finicky after awhile.
__________________
Pressing on
Never argue with an idiot; they'll drag you down to their level and beat you with experience." ~ Anonymous
|
|
#3
12-18-2006, 12:48 PM
|
||||
|
||||
|
Re: Dragun problems
co2
no regulator will check screws thanks for the help
__________________
Dragun T-1-clamping feedneck,Torp hpr,Micro-Rock LPR. Pilot ACS-Low-Blow bolt,cocker feedneck,T-1 Hpr, turbo valve,polished DragunFly-T-1 LPR,T-1 HPR Dragunfire-TES Hpr,Polished Rebel-Half-backed(by me) E99 Xraider Black LCD Fasta Feedback
|
|
#4
12-18-2006, 04:23 PM
|
||||
|
||||
|
Re: Dragun problems
Wait what kind of Dragun is it?
__________________
N'Vasion Paintball | T-1 Project | MR1 Project | Feedback (+30,-0) | PBN Feedback (+34,-0) | Myspace | Better Sniping 101 Quote:
|
|
#5
12-18-2006, 04:36 PM
|
||||
|
||||
|
Re: Dragun problems
i got it used but has a bubble sticker on it that says dragon fire. older electronic 13 bps semi only board. gas through and vertical feed.
__________________
Dragun T-1-clamping feedneck,Torp hpr,Micro-Rock LPR. Pilot ACS-Low-Blow bolt,cocker feedneck,T-1 Hpr, turbo valve,polished DragunFly-T-1 LPR,T-1 HPR Dragunfire-TES Hpr,Polished Rebel-Half-backed(by me) E99 Xraider Black LCD Fasta Feedback
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
