![]() |
|
#1
|
||||
|
||||
|
ok so i just got my electra last night and i spent a few hours breaking in the bolt i went out and shot it today and it was breaking a lot of paint. im going to try and break it in some more but i could use all the help i can get.
setup electra 05 halo B 22bps pure energy tank |
|
#2
|
||||
|
||||
|
all i can think of is try breaking it in more. it took for ever to break in my bolt. or it could just be cheap balls.
|
|
#3
|
||||
|
||||
|
stick a squeegee down the feedneck and keep firing with air
|
|
#4
|
||||
|
||||
|
ok thanks
would it work if i just let the bolt go forward when a squege is in there and let it sit there for a day? im short on air at the moment |
|
#5
|
||||
|
||||
|
take out the bolt and start compressing-decompressing it while your watching TV
![]() |
|
#6
|
||||
|
||||
|
yeah thats wht i did last night
|
|
#7
|
|||
|
|||
|
Check ur paint b4 mack sure it floats down the barrel rite..I never had to break in my bolt but at first I was choppin balls like crzy changed paint got new hopper an bow it workd like perfect
__________________
Spyder Electra Acs 2k5 Scenario dreams T-board Scenario dreams Ramping chip Check it Assault block Egg w/z/board Cp Regulator 14-Stiffi barrel Cp flame drop foward Trinity feed neck 32 degrees Micro gauge Microline Kit Dye stickies |
|
#8
|
||||
|
||||
|
and make sure you are using fresh paint.
HacKeR
__________________
Quote:
|
|
#9
|
||||
|
||||
|
ok
|
|
#10
|
||||
|
||||
|
i spent the rest of the little air i had and spent another hour breaking it in by hand. then I put in some newer paint and it worked great. back to old and it started breaking again so i threw out the old stuff.
Thanks to evryone ![]() |
![]() |
| Thread Tools | |
| Display Modes | |
|
|