![]() |
#11
|
|||
|
|||
![]() i bought the 32 degrees spring kit and put in the heavy one. mine was shooting 340+ fps, but since im using co2 i get fps spikes so once in a while i get 365, 380 etc. but ive never gotten over 400. this is with the velocity screw turned in about an 1/8
|
#12
|
|||
|
|||
![]() so... whats te best choice of springs kit to buy, i mean the brand, performance?
|
#13
|
|||
|
|||
![]() I had that same problem and all i did is took the gun apart(pulled the spring off) and took out the adjuster and it was shooting at 240. And after i was done playing i put it back in and it worked fine after. Try that and see if it works.
|
#14
|
|||
|
|||
![]() Out of the box, my striker plug/ velocity screw was jammed, but when I got a new 1 I had 280 fps
__________________
Click here to see my SpecOps Brigade Profile! |
#15
|
|||
|
|||
![]() I'm having exactly the same problem, my marker is shooting at about 320 FPS
are there any the risks or problems if I dont fix this and keep on playing with this velocity? |
#16
|
||||
|
||||
![]() Quote:
Now if your playing indoors/speedball... thats a problem. It is very painful... but not at the extremely dangerous point yet. Usually indoor chronos/speedball chronos want you to put your gun at 250-300FPS. I will see what my MR1 shoots at when I get it... I hope I dont have the same problems.
__________________
N'Vasion Paintball | T-1 Project | MR1 Project | Feedback (+30,-0) | PBN Feedback (+34,-0) | Myspace | Better Sniping 101 Quote:
|
#17
|
|||
|
|||
![]() my mr1 was hot out of the box clocking at 320 after a hopper of paint it was down to 260 now i have a hard time making 270 after shooing thru 2 cases
spring kit is a must |
![]() |
Thread Tools | |
Display Modes | |
|
|