Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Discontinued Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 06-19-2006, 12:04 PM
Guitar_kid99's Avatar
Guitar_kid99 Guitar_kid99 is offline
Team Captain / Team Mechanic
 
Join Date: May 2006
Posts: 121
Exclamation to remove the shroud without cutting it off

ok so if you dont have access to somthing to cut the shroud off or want to be able to put it back on here is what you do (continue to step 8)
this can allso be done to take the fore grip off (continue only to step 3)

1. there are 2 allen screws under the fore grip that hold it on unscrew those and the fore grip will become loose
2. (you may want to watch spyder's tutorial video on how to take off/replace an air hose first) using a wrench unscrew female part of the disconnect hose from the male part on the drop forward
or unscrew the dropforward if you dont want to mess with the air hose
3. slide the fore grip down or off of the gun and air hose. (if you are taking the grip off screw on the air hose or dropforward and then youre done)
4. now that the fore grip is off you will see that the shroud is a seperate part that is held on with an allen screw(s)
5. unscrew the allen screw(s) and slide the shroud off
6. slide the foregrip on (if you want it on still) and then screw in the allen screw(s) that hold it on the main body
7. screw on the female part of the air hose to the male part on the drop forward
8. place new barrel on gun

NOTE: the barrel does not need to be taken off during this procedure
__________________
Spyder MR2
CO2
Evlution2
Smart Parts 14" Freak Barrel W/Freak Tip

oo bungle, thats an i, oh bingo, BUNGIE!!

Last edited by Guitar_kid99 : 06-20-2006 at 06:00 PM.
Reply With Quote
  #2  
Old 06-19-2006, 12:36 PM
wylde01's Avatar
wylde01 wylde01 is offline
you wanna mess with me?
 
Join Date: Apr 2006
Location: Del City, Oklahoma
Posts: 723
Default Re: to remove the shroud without cutting it off

thanks for posting this but i think most people here already knew about it
Reply With Quote
  #3  
Old 06-19-2006, 01:09 PM
Guitar_kid99's Avatar
Guitar_kid99 Guitar_kid99 is offline
Team Captain / Team Mechanic
 
Join Date: May 2006
Posts: 121
Default Re: to remove the shroud without cutting it off

oh well they should make a sticky of a list of problems and this how to take the shroud off so people arent asking the same question over and over again
__________________
Spyder MR2
CO2
Evlution2
Smart Parts 14" Freak Barrel W/Freak Tip

oo bungle, thats an i, oh bingo, BUNGIE!!
Reply With Quote
  #4  
Old 06-19-2006, 07:43 PM
breakxeggs's Avatar
breakxeggs breakxeggs is offline
Kadillak Killa
 
Join Date: May 2006
Location: Around Hershey Pa
Posts: 206
Default Re: to remove the shroud without cutting it off

who would have cut the shroud off anyway?
__________________
'04 Shocker Vision,BlackWidow,Check It on/off, Smart Parts Pro-Touch Grips, Free Flow Trigger, ShockTech Reg, NDZ 15* Tilt, CCM No Pro Clamping Feedneck, NDZ LP Firing Can, NDZ Bolt Guide, HE Turbo Charger Bolt,
Reply With Quote
  #5  
Old 06-20-2006, 05:59 AM
NextoN's Avatar
NextoN NextoN is offline
Pro
 
Join Date: Feb 2006
Location: Norway
Posts: 104
Default Re: to remove the shroud without cutting it off

Ehm I think everybody knows this from just looking at the MR2. You can see at the shroud can be taken off. You don't need to remove the foregrip off the marker to take off the shroud
__________________
Pain(t) is temporay, glory is forever!
Reply With Quote
  #6  
Old 06-20-2006, 09:43 AM
Guitar_kid99's Avatar
Guitar_kid99 Guitar_kid99 is offline
Team Captain / Team Mechanic
 
Join Date: May 2006
Posts: 121
Default Re: to remove the shroud without cutting it off

yes you do becouse the foregrip covers up the screw on the shroud
__________________
Spyder MR2
CO2
Evlution2
Smart Parts 14" Freak Barrel W/Freak Tip

oo bungle, thats an i, oh bingo, BUNGIE!!
Reply With Quote
  #7  
Old 06-20-2006, 02:15 PM
NextoN's Avatar
NextoN NextoN is offline
Pro
 
Join Date: Feb 2006
Location: Norway
Posts: 104
Default Re: to remove the shroud without cutting it off

yes but you don't have to take it completley off the whole gun-
You dont have to disconnect the hose
__________________
Pain(t) is temporay, glory is forever!
Reply With Quote
  #8  
Old 06-20-2006, 03:24 PM
thebiest's Avatar
thebiest thebiest is offline
thebiestsc
 
Join Date: Jun 2006
Location: Lethbridge, Alberta, Canada
Posts: 28
Default Re: to remove the shroud without cutting it off

just disconect the drop forward from the handle and slide the foregrip down, and thats all you need to do to get at it
Reply With Quote
  #9  
Old 06-20-2006, 03:32 PM
Guitar_kid99's Avatar
Guitar_kid99 Guitar_kid99 is offline
Team Captain / Team Mechanic
 
Join Date: May 2006
Posts: 121
Default Re: to remove the shroud without cutting it off

Quote:
Originally Posted by NextoN
yes but you don't have to take it completley off the whole gun-
You dont have to disconnect the hose
yeah but you have to disconect it or the drop forward to bring it down enough to get at the screw stated by thebiest
__________________
Spyder MR2
CO2
Evlution2
Smart Parts 14" Freak Barrel W/Freak Tip

oo bungle, thats an i, oh bingo, BUNGIE!!
Reply With Quote
  #10  
Old 06-20-2006, 05:19 PM
NextoN's Avatar
NextoN NextoN is offline
Pro
 
Join Date: Feb 2006
Location: Norway
Posts: 104
Default Re: to remove the shroud without cutting it off

yea
__________________
Pain(t) is temporay, glory is forever!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 02:44 PM.