need to find a gun 300 or lower

[fish3191]

im trying to find a bit of a high end gun that has a couple of basic requirements. a gun that is about 300 or lower in price. It needs to work fine with CO2 because im not spending all my money on a nitrogen tank. If the gun would have eyes and multiple firing modes it would be sweet. I hate chopping paint. one that comes with a good stock barrel and requires a low amount of upgrades. If anybody know of a gun that would fit these requirements, i would greatly appreciate it.
thanks

[Hossy]

ions run on Anti Siphoned Co2..thats probably the best bet for the Co2...but if u had HPA theres a whole different world of possiblilites in the price range of 300 bucks

check out my sig maybe?

[ShadowX]

http://www.sakworldpaintball.com/20smpaionpro1.html

There you go.. Comes with the first essential upgrades (Freak, Q-Lock, and On/off ASA with Rail), besides a QEV.. Which I would diffenately pick up along with the ION Pro.. QEV's are between 15 and 20 Dollars and make the Marker shoot loads better and it will keep grease out of your solenoid and give you better efficiency...

[ShadowX]

I would buy an HPA tank though.. ION's don't like Co2 AT ALL.. They are really cheap.. Just look around PBN.. You can get a 48/3000 aluminum tank for about 40-50 Shipped.. That ION Pro with the QEV will give you about 600 shots off that tank..

And after you put an anti-siphon kit on your co2 tank, and and the cost It will take to have an Air-smith install it.. Plus the cost of the original Co2 tank.. It will probably equal around 40 bucks..

[colonel_moo]

well no offense, but if you arent going to get an HPA tank, dont bother getting a high end gun. you will have more problems running co2 with it than its worth.

[pman15]

no hpa tank=no high end gun

[bamf-hacker]

Originally Posted by colonel_moo

well no offense, but if you arent going to get an HPA tank, dont bother getting a high end gun. you will have more problems running co2 with it than its worth.

If you must get a gun then I would say the Ion. MAKE SURE YOU USE ANTI-SIPHONED CO2. If you don't use anti-siphoned CO2 you will freeze the internal hoses. Even if you have the right CO2 tank don't shoot fast.

I would say hold off on your purchase, or get a used Ion and a steel HPA tank. That should run you about $300

HacKeR

[Hossy]

agian check my sig...and big daddy d has an HPA tank, idk if its sold yet or not tho

[ShadowX]

Originally Posted by bamf-hacker

If you must get a gun then I would say the Ion. MAKE SURE YOU USE ANTI-SIPHONED CO2. If you don't use anti-siphoned CO2 you will freeze the internal hoses. Even if you have the right CO2 tank don't shoot fast.

I would say hold off on your purchase, or get a used Ion and a steel HPA tank. That should run you about $300

HacKeR

Hacker, ION's are only 190-200 Now, So he could get a Brand New ION and a Brand New PMI 48/3000 Tank off of Pbgear for 260 shipped.. A used ION and Used tank will prolly be around 200-210..

[bamf-hacker]

Originally Posted by ShadowX

Hacker, ION's are only 190-200 Now, So he could get a Brand New ION and a Brand New PMI 48/3000 Tank off of Pbgear for 260 shipped.. A used ION and Used tank will prolly be around 200-210..

My bad... Use the extra money for a good hopper

HacKeR