Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-27-2006, 04:23 PM
Sandman_Bravo's Avatar
Sandman_Bravo Sandman_Bravo is offline
Spyder Vet
 
Join Date: Mar 2006
Location: boondocks, west-bum**ck
Posts: 1,845
Default ACS bolt cocking pin

My cocking pin broke off leaving the beveled bottom portion jammed in the bolt under the spring loaded ball. I had to disassemble the bolt, which is no easy chore. For anyone in a similiar situation, the only way to remove the slotted head screw that holds the spring loaded ball in (at the end of the bolt where the cocking pin snaps in) is to heat it up. I held it with a welding glove while inserting a rod through the hole that the hammer pin seats into. Then applied gas heat (plumbers torch) to the end. This softens the loc-tite on the threads enabling removal. A heat gun or hair dryer may also work. Finally before re-assembly I dremmel polished it to a mirror finish. It may have been a waste of time since I'm waiting for a Bandit Bolt but I'll have a working spare at least.
__________________
Think about it: Click Me * My Feedback
http://www.zdspb.com/tech/misc/resou...tspertank.html
--------
These colors will never run.

Last edited by Sandman_Bravo : 09-12-2006 at 05:10 PM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 01:41 PM.