Hey Guys Need Help With Pilot ACS

[viseversa2303]

Well i just bought a pilot acs and anything i have to do beside just attach the tand and the hopper and ready to play. I have no idea what im doing i still havent even used it yet. I first want to get feedback from you guys to tell me what i have to do first before i actually use it. Oh yeah when i bought it... it came with 3 bags one was the charger, the other was with some yellow thing to put in your barrell and some little rubber bands i think and some screws and some other little tools. Just to let you guys know i have no idea what im doing i read up on things but i cant find anything because there terms i dont understand.


Well thanks for any help you guys give me. Sorry for the large paragraph but anyway thanks.

[bungeye]

hey 1st welcome 2 the forums, ask any question, blah blah blah, were all happy 2 help.

!st u need to know ur marker, hers a video on how to dissamble your marker
http://www.kingman.com/section/suppo...os/videos.html click on the 1st video then click on the format u want to download it in (on the righthand side)

once familer go on to the following

a good thing to do is to break in the bolt. simply take the bolt out and hold the pin that goes into the striker. Hold onto this and with one hand, and with the other grab the main white part of the bolt. move these back and forth for abot 30min (sit in front of the tv while u do it). you will feel that after a while it becomes real easy. this is because the spring has been broken it. (which is good) replace the bolt.

next take out the striker and oil the o-ring on it. then replace it back into the body.

before each use remove the barrel, cock the marker by pulling the knob at the top of the marker, and put about 3 drops of oil into the ASA (where the tank screws into) shoot abot 10 times then attach the barrel. and your ready to go.

Check out this site aswell
http://www.ottersccustoms.com/spyder.html
it is full of alot of step by step modifications that you can do at home.
polishing trhe internals is highly recommended. also most of the answers to your questions can be found on it. If not ask here.

[viseversa2303]

One more question

The package it comes with that has those tools in it what do i do with those and are those the "o-rings" that are in the packet.

[druid]

they are spares...hang onto them

[viseversa2303]

spare o-rings? and thanks

[Sandman_Bravo]

Always wear eye protection even when not playing/target practice. There is a factory defect where the dust cover can break off and fly in your face.

http://www.spyder.tv/forums/showthread.php?t=2460

[viseversa2303]

another thing which is a good choice for a tank because i still havent got a tank for my gun but i have no idea what to get can anyone help me with this?

Thanks

[pman15]

well i got a 20,12,and 9 ounce right now. but once i get a new gun i am plannig to switch to hpa. hpa is a lot better co2

[viseversa2303]

what is hpa?

[pman15]

high pressure air