How to adjust the trigger???

[mv540]

I bought a acs pilot, and it is pretty good ...but how can i adjust the trigger... do I have to diassemble my gun?..

any help will be apriciate

[ad0131065]

You just have to take the trigger frame off. there will be a small screw on top of the trigger and you just adjust that. Screw it in to make the trigg go farther away from the micro switch and out to make it closer.

[HITMAN]

i didn't kno u had to take the whole trigger off because i don't i jus adjust when its still on the entire gun.

[millight3]

you dont have to take the whole trigger off, get the medium sized allen wrench and like twist that screw thing up in the gun near the trigger and you will figure it out.

[mv540]

thanks i wil have to try it

[mv540]

At what distance did you recomend me to adjust the trigger?...1cm, 0.5cm...etc

[ricochet08]

hmmm...on the pilot i used (and on my imagine ) i don't have to take the trigger frame, or the trigger off @ all. there's a hole close to the trigger frame and u can adjust it from there. then if u want, u can adjust the back stop.



adjust to ur liking

[ooglieboogliebob]

welll you'd havta fiddle with it actually .. just make the trigger touch the button .. but not press it down .. and you should be find.. you just needa take ur trigger frame off and then press it down real hard on your gun when your testing for it... not all are the same ... so you'd havta do it urself .. and use your own opinion

[bamf-hacker]

and I would suggest to add a drop of blue loctite on the screw. It likes to move during game play.

HacKeR

[bigred76]

Not blue Loctite. Get a bottle of clear nail polish and put a drop of that on the THREADS of the screw, not the head. You want to be able to adjust it still.