|
|
#1
04-30-2006, 02:55 PM
|
||||
|
||||
Trinity front block
i was thinking of getting either the blue or the black
but really i dont care about the color the performance is what i care about I have the stock 05 ACS with no upgrades except the bolt now is this a good investment or should i use the money on a hooker? Blue http://www.actionvillage.com/is-bin/...wAAAEJk2bsdwN5 Black http://www.actionvillage.com/is-bin/...0AAAEAi5Shw5qH 
|
|
#2
04-30-2006, 03:41 PM
|
|||
|
|||
|
Re: Trinity front block
You may want to look at the Assault Block, because I feel it would be more ergonomical, and I also have a feeling it would be more free flowing then the Trinity, but I'll let someone who knows more then I do about these products tell you which is more efficient. If you were deciding between the trinity blocks, go with the blue one, it's a newer model, better design, and it looks pretty sweet.
PS. If I were you, I would take your back up gun out of the signature, not only does it make it excessivly long, but come on, a Brass Eagle, how much more embarassing could it be?
|
|
#3
04-30-2006, 03:56 PM
|
||||
|
||||
|
Re: Trinity front block
I respectfully disagree with Tom. I had a Trinity VA on my Esprit and it allowed me to hold tighter than an assault block...it almost matched the angle of the grip perfectly but I agree with him in that it was not as high flowing as the assault block. In a 'stock' marker configuration, the Trinity will be awesome but if you want to go LP you'll have to drill it out.
And leave him alone about his BE...when I started playing, the BE was the 'upgrade' model to the nelly... 
__________________
|
|
#4
04-30-2006, 05:39 PM
|
|||
|
|||
|
Re: Trinity front block
yep ... well this model of the trinity .. is close to the flow of the assault block ... and yeah i agree with druid .. the -10* angle lets you hold your gun closer to your body ...
... heh druid .. don't you drill everything ??  ... i believe i'v seen the assaultblock drilled by you also ...
__________________
KUSA Feedback 47+/0- PBN Feedback 41+/1- New PBN Feedback 18+/0- EBAY Feedback 9+/0- Ion Owners Feedback 3+/0- Automags Feedback 3+/0-
|
|
#5
04-30-2006, 08:18 PM
|
||||
|
||||
|
Re: Trinity front block
haha...probably. Since I've rendered all my Spyders to LP (except the one Im working on now...it's not finished)...I had to. Here's what it looked like on the Esprit...it ran 200 psi @ 279 FPS on HPA....Oh...and it was a version 1 Trinity...not the one you can get now...
__________________
|
|
#6
05-01-2006, 02:13 PM
|
|||
|
|||
|
Re: Trinity front block
Yeah, that makes sense to me. Probably just an asthetic choice, and after seeing druid's picture, I would have to say that the trinity looks pretty nasty on that gun.
|
|
#7
05-04-2006, 03:07 PM
|
||||
|
||||
|
Re: Trinity front block
i really dont want to do any drilling
i suck at shop so i suck at measuring i want to adjust my marker to the best but not have to drill anything
|
|
#8
05-04-2006, 09:03 PM
|
||||
|
||||
|
Re: Trinity front block
then get the assault block for LP
get the Trinity and leave it stock
__________________
|
|
#9
05-06-2006, 12:24 PM
|
|||
|
|||
|
Re: Trinity front block
.... welll you really don't need measuring for drilling the VA ... just get a good sized drill bit and a handdrill ... just remember to drill straight and you should be fine
 if you can't drill straight .. a drill press .. opening holes up is really all your doing ... but if you really don't wanta do it .. go for the assault block ...
__________________
KUSA Feedback 47+/0- PBN Feedback 41+/1- New PBN Feedback 18+/0- EBAY Feedback 9+/0- Ion Owners Feedback 3+/0- Automags Feedback 3+/0-
|
|
#10
05-06-2006, 12:51 PM
|
||||
|
||||
|
Re: Trinity front block
or send it to me and I'll do it for a moderate fee
__________________
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
