Valve

[killerpinecone]

How do I fet the freakin valve out of my 05 electra??

[ppuma]

Are you asking how to take it out?

[killerpinecone]

Yeah i am going to replace it with a maddman, took the gun apart but cant get it out.

[Muddytaco]

once you take out the screw on the bottom holding it in place and once the VA is off push it out towards the va with something soft but stiff.

[NitroBall]

if u are asking how to get the valve out then :-
de-gas marker,
take out bolt , striker.
unscrew the 2 allen screws that is holding the frame.
unscrew the allen screw that is holding the VA .
once you have taken them all apart, you can see a screw on the underside of the body, use a flat head screwdriver to take it out.
using a fluffy stick or something similar(but not a screw driver or something metal) poke it from the back ,lower chamber of the marker, and push the valve out to the front until it comes out.

[ooglieboogliebob]

Originally Posted by NitroBall

if u are asking how to get the valve out then :-
de-gas marker,
take out bolt , striker.
unscrew the 2 allen screws that is holding the frame.
unscrew the allen screw that is holding the VA .
once you have taken them all apart, you can see a screw on the underside of the body, use a flat head screwdriver to take it out.
using a fluffy stick or something similar(but not a screw driver or something metal) poke it from the back ,lower chamber of the marker, and push the valve out to the front until it comes out.

... but remember to hit the nonstarred side of it ... sould be a pin on the side ... And use a nail .. that's head's shaved down .. also use like a battle swab or wooden dowel to push it out ...

[Hob Hayward]

Um? You don't need to take the rod out you know... Unless you want to remove it from the back, but whats the point?

[ppuma]

Here watch the video.

http://www.kingman.com/section/suppo...os/videos.html