Spyder Forums  

Go Back   Spyder Forums > General Spyder Discussion > General Spyder Forum
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 06-03-2010, 08:18 AM
taytay taytay is offline
New Guy
 
Join Date: May 2010
Posts: 7
Post solenoid/hopper problems

i have a vs2 and the solenoid and hopper arent getting along . my solenoid isnt clicking loud enough for my hopper when i start getting higher in speed.this has cut my bps down alot! I have a invert halo too someone help me?
Reply With Quote
  #2  
Old 06-03-2010, 12:42 PM
jore13 jore13 is offline
Member
 
Join Date: Oct 2008
Posts: 29
Default Re: solenoid/hopper problems

your solenoid has nothing to do with your hopper. those hoppers are sound controlled so they feed when they hear a shot being fired.

going by what you are saying, it sounds like the hopper isnt feeding fast enough for the gun. try slowing down your shooting or getting a better hopper. i recommend a pinokio, have one on my vs2 and no problems at all
__________________
spyder vs2
cp shoty reg silver, tadao vs board w/ m7 chip,
cp silver sling trigger, smart parts linear 14" dust black,
smart parts max-flo micro and 68/45 carbon fiber,
hybrid hedloc clamping feedneck, smoke pinokio hopper

ebay feedback:
http://feedback.ebay.com/ws/eBayISAP... =AllFeedback
Reply With Quote
  #3  
Old 06-03-2010, 03:32 PM
taytay taytay is offline
New Guy
 
Join Date: May 2010
Posts: 7
Default Re: solenoid/hopper problems

thank you, sort feel stupid now haha
Reply With Quote
  #4  
Old 06-04-2010, 12:16 AM
taytay taytay is offline
New Guy
 
Join Date: May 2010
Posts: 7
Default Re: solenoid/hopper problems

i put some air in it and some paint and have been firingit, i dont think its not fast enough, its not hearing it, is there anything i can do for that?
Reply With Quote
  #5  
Old 06-04-2010, 03:47 AM
jore13 jore13 is offline
Member
 
Join Date: Oct 2008
Posts: 29
Default Re: solenoid/hopper problems

check the manual for it to see if there is a sensitivity setting for it.
__________________
spyder vs2
cp shoty reg silver, tadao vs board w/ m7 chip,
cp silver sling trigger, smart parts linear 14" dust black,
smart parts max-flo micro and 68/45 carbon fiber,
hybrid hedloc clamping feedneck, smoke pinokio hopper

ebay feedback:
http://feedback.ebay.com/ws/eBayISAP... =AllFeedback
Reply With Quote
  #6  
Old 06-04-2010, 09:41 AM
taytay taytay is offline
New Guy
 
Join Date: May 2010
Posts: 7
Default Re: solenoid/hopper problems

ya its at max sensitivity max motor speed and the feed stack is on
Reply With Quote
  #7  
Old 06-04-2010, 01:48 PM
jore13 jore13 is offline
Member
 
Join Date: Oct 2008
Posts: 29
Default Re: solenoid/hopper problems

turning the sensitivity to the max means you need something really loud to get it to feed. try turning it down and firing. keep going back and forth until you find a good balance where it wont feed without you firing but will feed with you firing.
__________________
spyder vs2
cp shoty reg silver, tadao vs board w/ m7 chip,
cp silver sling trigger, smart parts linear 14" dust black,
smart parts max-flo micro and 68/45 carbon fiber,
hybrid hedloc clamping feedneck, smoke pinokio hopper

ebay feedback:
http://feedback.ebay.com/ws/eBayISAP... =AllFeedback
Reply With Quote
  #8  
Old 06-04-2010, 10:04 PM
taytay taytay is offline
New Guy
 
Join Date: May 2010
Posts: 7
Default Re: solenoid/hopper problems

ok thanks i will try that im am going to the field tomorrow so i will tinker with it there between games
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 11:24 PM.