Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 08-09-2011, 10:35 AM
milljord milljord is offline
New Guy
 
Join Date: Aug 2011
Posts: 1
Default electra regulator

My Electra 09 recently started to act funny, I could hook air up to it and fire about 4 shots then it lost all pressure and wouldn't re cock and made a pssssssshhhhhhh (sorry for bad sound effects) noise. I would pull the bolt back and try to fire and the ball would just roll out the barrel. So i tried this a few more times, reading up on common problems. The striker o ring is in perfect condition as well as the rest of the bolt. So I took the regulator adjuster off of the regulator and out fell a mashed up piece of plastic as well as a metal washer in 3 pieces. I have no idea what these are or where they came from and was wondering if anybody else has any idea what they are or what I should do???
Reply With Quote
  #2  
Old 08-09-2011, 03:43 PM
TheDarkShadow's Avatar
TheDarkShadow TheDarkShadow is offline
add 1,794 posts
 
Join Date: Feb 2008
Location: South East IN
Posts: 2,774
Default Re: electra regulator

sounds like the regulator is shot, i'd call kingman, they may be able to fix/replace it
__________________
E-framed Sonix Pro
2009/2010 bone stock sonix
Reply With Quote
  #3  
Old 08-09-2011, 10:16 PM
bigred76's Avatar
bigred76 bigred76 is offline
Resident *******
 
Join Date: Dec 2005
Location: San Jose, CA
Posts: 6,228
Default Re: electra regulator

Look up the regulator part numbers on page 16 of this: http://www.spyder.tv/section/support...tra_eye_09.pdf

It will be faster if you have the information before you call Kingman.
__________________
SOC (+41, -0) | PBN (+12, -0) | New PBN (+20, -0)

URT... Ultimate Resource Thread!

The [OFFICIAL] Manual Thread!

BigRed Photography

Quote:
Originally Posted by Muddy Taco
ya my vagina hurts sometimes to
Reply With Quote
  #4  
Old 09-29-2011, 03:52 PM
spud 123 spud 123 is offline
New Guy
 
Join Date: Jun 2011
Posts: 4
Default Re: electra regulator

why not just get a CP reg
Reply With Quote
  #5  
Old 10-02-2011, 10:54 AM
junits15 junits15 is offline
Member
 
Join Date: Dec 2010
Posts: 38
Default Re: electra regulator

Just get a new regulator, It will be more consistent anyway
Reply With Quote
  #6  
Old 10-08-2011, 10:14 AM
Atwaterpaintball.com Atwaterpaintball.com is offline
New Guy
 
Join Date: Sep 2011
Location: Merced
Posts: 4
Default Re: electra regulator

You could also check to see if your O-rings are not riped first before getting the regulator replaced or buying new one. It is the least expensive thing to do and if you have warrenty you can send it out kingman for repair but you have to pay for the shipping to send it over to Kingman.
Reply With Quote
  #7  
Old 10-21-2011, 03:18 AM
bigred76's Avatar
bigred76 bigred76 is offline
Resident *******
 
Join Date: Dec 2005
Location: San Jose, CA
Posts: 6,228
Default Re: electra regulator



Buying a new one isn't always the best solution. In the end it's a Spyder: it doesn't need to have absolute consistency. I've actually been quite fond of the old bottomline regs Kingman used to have. They were consistent enough with proper maintenance and tuning, and fit the markers perfectly.
__________________
SOC (+41, -0) | PBN (+12, -0) | New PBN (+20, -0)

URT... Ultimate Resource Thread!

The [OFFICIAL] Manual Thread!

BigRed Photography

Quote:
Originally Posted by Muddy Taco
ya my vagina hurts sometimes to
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 07:23 AM.