Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-21-2011, 09:28 PM
New.Shooter New.Shooter is offline
New Guy
 
Join Date: Mar 2011
Location: IL
Posts: 23
Default question!!!!!

Chopping, y does it happen and how can i prevent it? my SP ION was working good and one day it was chopping like hell..i was thinking maybe its my barrel i bought (all Freak, blue insert), but for a $100 barrel, it shouldnt chop or at least not every shot. What are the other causes of this problem..****ty balls?, after i cleaned out all the crap and put everything together i not only get a few balls that chop but now they are going all over the place, maybe one or 2 will hit straight on..any clues in what i should do?? and maybe y does it happen?

anything is greatly appreciated.
__________________
Dye i4 (Tan liquid)
Evolution Hopper
Ninja HPA 68/4500


:PE Etek3 LT: <3

:Spyder Pilot 09 w/eyes:
-CP ASA (Black)
-CP Rail (Red)
-Macro line w/ fittings
-CP Regulator(Future)
-CP Clamping Feed Neck(Future)
-CP 14" Barrel(Future)
:SP ION:
-Shocktech Bolt (Red)
-Shocktech Reg
-Clamping Feed Neck (Red)
-New Trigger (Red)
-QEV
-Dye Sticky Grips
-14" Freak Barrel 2 piece (Red/Black/Blue insert)
-Macro line w/ fittings
Reply With Quote
  #2  
Old 05-22-2011, 01:21 AM
bigred76's Avatar
bigred76 bigred76 is offline
Resident *******
 
Join Date: Dec 2005
Location: San Jose, CA
Posts: 6,228
Default

Did you clean and ensure the eyes of your marker are on? Perhaps it is the barrel, did you check your paint to bore fit before playing?
__________________
SOC (+41, -0) | PBN (+12, -0) | New PBN (+20, -0)

URT... Ultimate Resource Thread!

The [OFFICIAL] Manual Thread!

BigRed Photography

Quote:
Originally Posted by Muddy Taco
ya my vagina hurts sometimes to
Reply With Quote
  #3  
Old 05-22-2011, 05:50 AM
vikingshadow's Avatar
vikingshadow vikingshadow is offline
Ah-roo! Ah-roo! Ah-roo!
 
Join Date: Dec 2005
Location: Where my stuff is. Duh!
Posts: 6,950
Default Re: question!!!!!

For the balls all over the place, check your FPS. Could be shooting hot. Of course, if you have paint in your barrel, that's going to make them go everywhere also.

Is the paint just in the barrel? Or is it on the bolt? If it's just in the barrel and hardly any on the bolt, those are barrel breaks and not chops. If its all over the bolt then that's a chop.

Need some information though - what loader do you use (is it that Evolution you have in your sig?), and what setting is it on? How fast are you shooting? Are your eyes on? What paint are you using and was it new and fresh?
__________________
Pressing on
Never argue with an idiot; they'll drag you down to their level and beat you with experience." ~ Anonymous
Reply With Quote
  #4  
Old 05-24-2011, 09:48 PM
New.Shooter New.Shooter is offline
New Guy
 
Join Date: Mar 2011
Location: IL
Posts: 23
Default Re: question!!!!!

@vikingshadow- Dont think im shooting hot cause u have to crono before u play..and i was shooting between 265-270 max 280. as for the barrel, i did notice that it was bursting towards the end and some inside, and i was using a mixture of old and new paint..yes i have the evolution loader (egg), not sure what speed it is at but maybe ill turn it down some. yes eyes are on, not shooting fast.. would say i shoot semi auto, like to make my shots count.

@bigred76- yea pretty much had to clean after every game and during the game.. as for bore size, i was told it was the standard bore size. i did the ball test and the ball came out fine when i blew on the other end, didnt get stuck.

the paint that they sell at the field are Marballizer Paintballs, they are tournament grade and they seem good. i'm from IL so i play at CPX if ur familiar with that field.
__________________
Dye i4 (Tan liquid)
Evolution Hopper
Ninja HPA 68/4500


:PE Etek3 LT: <3

:Spyder Pilot 09 w/eyes:
-CP ASA (Black)
-CP Rail (Red)
-Macro line w/ fittings
-CP Regulator(Future)
-CP Clamping Feed Neck(Future)
-CP 14" Barrel(Future)
:SP ION:
-Shocktech Bolt (Red)
-Shocktech Reg
-Clamping Feed Neck (Red)
-New Trigger (Red)
-QEV
-Dye Sticky Grips
-14" Freak Barrel 2 piece (Red/Black/Blue insert)
-Macro line w/ fittings
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 06:55 AM.