Hopper ?

[amiracle]

09 Pilot breaks balls with an invert halo too. What is a decently priced hopper that will keep this from happening?

[Talon]

I use a Halo V35 on mine, but the pilot should be breaking paint at all with the eyes on it.

[TheDarkShadow]

yeah there should be no chops due to lack of speed. i'd suspect that something else is causing breaks.

[amiracle]

any ideas what could be wrong with it?

[TheDarkShadow]

are you only breaking paint at high ROF? what's your velocity set at? and what kind of paint are you using?

[vikingshadow]

Paint to barrel match? Eyes on? Eyes working?

[amiracle]

eyes on, xo specktrum paint (field mandatory), velocity is 245ish. it is very random when it breaks, it can be slow or fast rof. I think the are working, running stock barrel. it seems to be leaving shells in the feed neck when it chops then forces them down the barrel.

[TheDarkShadow]

are your detents intact? if not it could be double feeding

[amiracle]

Yeah they look like they are, they aren't chipped or cracked.

[Talon]

Whens the last time you cleaned the eyes?
I would check to make sure the eyes are connected to the board as well.