|
|
#1
02-13-2011, 07:08 AM
|
||||
|
||||
eye drill locator template
I'm looking for Otter's (or any other) eye locator template. I've searched but can't find any viable links or info. If anyone has one; can you give me a link or pm me. Thanx in advance.
__________________
Think about it: Click Me * My Feedback http://www.zdspb.com/tech/misc/resou...tspertank.html --------  These colors will never run.
|
|
#2
02-13-2011, 08:26 AM
|
||||
|
||||
|
Re: eye drill locator template
I have it. Let me see if I can find it and I will post it or email it to you
__________________
|
|
#3
02-13-2011, 08:26 AM
|
||||
|
||||
|
Re: eye drill locator template
What's the website that used to sell the t board? I think that guy has the template to them...might be a link in my signature link.
__________________
Pressing on
Never argue with an idiot; they'll drag you down to their level and beat you with experience." ~ Anonymous
|
|
#4
02-13-2011, 08:27 AM
|
||||
|
||||
|
Re: eye drill locator template
Whups! Shu beat me to it...
__________________
Pressing on
Never argue with an idiot; they'll drag you down to their level and beat you with experience." ~ Anonymous
|
|
#5
02-13-2011, 11:19 AM
|
||||
|
||||
|
Re: eye drill locator template
Scenario dreams used to have the templete (which is the link in your Spimmy guide= no longer valid) as well as the infamous Otter. Remember those days?-lol!
I don't think there's a current link to any one who has that template.
__________________
Think about it: Click Me * My Feedback http://www.zdspb.com/tech/misc/resou...tspertank.html -------- These colors will never run.
|
|
#6
02-13-2011, 01:22 PM
|
|||
|
|||
|
Re: eye drill locator template
I would not suggest using a template. When you print them out they're not to scale. Even if you could get one to scale it's only completely accurate for the marker it was made from.
Your best bet is to make your own calculations/measurements based on the marker you're using. Use masking tape on the marker body to mark the hole placements as I did in the "Add a gauge to a VA" article @ SPPS. Make the holes for the eyes dead center of the feedneck hole and about 3/32" to 1/8" at most from the bottom of the breech cavity. The other threaded hole placements will depend on the eye cover you use and where the detents are or will be.
__________________
www.sundragonpps.com or www.sundragonpb.com spyder magnetic triggers, performance striker, best & solderless micro-switches largest selection of stock spyder replacement parts you’ll find on the www all the spyder upgrade parts you’ll ever want or need spyder electronics, tadao boards and upgrade chips reputable spyder modification & general tech info
|
|
#7
02-13-2011, 05:29 PM
|
||||
|
||||
|
Re: eye drill locator template
Thanx SPPS!
__________________
Think about it: Click Me * My Feedback http://www.zdspb.com/tech/misc/resou...tspertank.html -------- These colors will never run.
|
|
#8
02-13-2011, 08:12 PM
|
||||
|
||||
|
Re: eye drill locator template
I noticed that everything didn't seem to line up perfectly on my first marker I drilled for eyes. So I resorted to only using 1 side of the template. With the holes that were on the template for the detent and detent screw hole, I could line those up, tape it on the marker and it worked well that way. Only other suggestion I would make is, if you have access to a drill press, use it. If you don't try to find one. I wouldn't try to drill them with a regular drill if my life depended on it.
__________________
|
|
#9
02-14-2011, 02:51 AM
|
||||
|
||||
|
Re: eye drill locator template
Thanx for everyone's help and input. I haven't received the board and eyes yet; they are coming from England. I am just trying to get everything together beforehand.
__________________
Think about it: Click Me * My Feedback http://www.zdspb.com/tech/misc/resou...tspertank.html -------- These colors will never run.
|
|
#10
02-14-2011, 06:40 AM
|
||||
|
||||
|
Re: eye drill locator template
that reminds me, i need to get that AMG drilled for eyes. but i dont have access to tools
__________________
8/23/03 OS KUSA #10898
Spyder to pump conversion tutorial! Project LP Reposted! Sales Thread Feedback Quote:
- from Ray Bradbury's Something Wicked this Way Comes
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
