Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 12-24-2010, 02:31 PM
rebelscout rebelscout is offline
New Guy
 
Join Date: Dec 2010
Posts: 1
Default Spyder Pilot ACS E-marker solinoid problem??

When the trigger is activated on my E-marker, the solinoid clicks but doesnt have enough force to trip the seere arm to release the bolt. I dont know if this is a bad battery (older battery but still doesnt fire while on the charger), bad solinoid, or maybe a bad circuit board. Maybe someone has some experience, and a source to get parts to fix the problem..
Thanks!
Reply With Quote
  #2  
Old 12-24-2010, 02:38 PM
vwjimmy's Avatar
vwjimmy vwjimmy is offline
Here, there, everywhere!
 
Join Date: Feb 2006
Location: Kentucky Bluegrass
Posts: 1,858
Default Re: Spyder Pilot ACS E-marker solinoid problem??

Sounds like voltage to me. It is a 9.6v battery right?? They are very unhappy when they do not get that voltage....and a bad battery will stop them quick. Also, a bad battery will hold it up even plugged in. I would try another first....
__________________
Angels, Timmys, ICD Bushy, Pimp, and lots of Spyders
Old Farts Club
Member #12

"Your marker cannot harm me...I'm the Juggernaut!!"
KUSA Feedback +56/-0
New PBN Feedback +20/-0
Old PBN Feedback +92/-0
Reply With Quote
  #3  
Old 12-25-2010, 09:11 AM
spy alelo spy alelo is offline
New Guy
 
Join Date: Sep 2007
Posts: 17
Default Re: Spyder Pilot ACS E-marker solinoid problem??

Testing while on the charger won't help, just do a full charge instead or use a fresh battery. I would look into it in this order if that doesn't help:

1. Make sure the velocity bolt is not all the way in.
2. Check trigger sears. Should have little wear and a sharp edge.
3. Check capacitor. Is that big canister with two wires connected to the board. If you see that the top of is bulged, not flat, or any brown residue coming from bottom or top, is bad. Can be replaced for less than $6 and a bit of soldering skills.
4. Try a different board if at all possible.
5. Measure the shaft length on the solenoid assembly. From the tip of the shaft to the bottom of the weight is exactly one inch, or 2.54cm. If longer than that, you can gently hammer it in a bit more.

If the marker was working before, and it started acting up after being stored for a while, is most likely a bad capacitor. If you are not sure about the way it looks, post a clear, close picture and I will be able to tell you if its leaking.
Reply With Quote
  #4  
Old 12-26-2010, 08:22 AM
TheDarkShadow's Avatar
TheDarkShadow TheDarkShadow is offline
add 1,794 posts
 
Join Date: Feb 2008
Location: South East IN
Posts: 2,775
Default Re: Spyder Pilot ACS E-marker solinoid problem??

spy alelo's #3 is a pretty good possibility
__________________
E-framed Sonix Pro
2009/2010 bone stock sonix
Reply With Quote
  #5  
Old 12-28-2010, 04:45 PM
slim and shady's Avatar
slim and shady slim and shady is offline
Life is peachy
 
Join Date: Jun 2007
Location: Wildwood, Alberta, Canada
Posts: 3,239
Default Re: Spyder Pilot ACS E-marker solinoid problem??

if a new battery doesnt help and your capacitor is good shim the selinoid to decrease the throw on it, this will give it more power.
__________________
General Shawn Wayne Tetz, Commander 187th Gaurds Mechanized Rilfe Division.
- Includes the 3rd armored brigade from the 34th Gaurds Armored Division. (APC's and armor as well as support elements)
-UCSF Armored Division Commander



Armored Units

-Deep insertion APC
-Killer "B" Battle Tank
-Troop Transport APC (almost done)
-Gun Truck heavy support unit (In the works)



-Order of Lenin (1st)
-Skyline Sergeant
-YGP Rep!
-Sector 4 team feild honor recipiant (UCSF)
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 07:58 AM.