![]() |
|
#1
|
||||
|
||||
|
I have one of the rocking rap 4 spyder electronic triggers and the solenoid isnt engaging all the way to drop the hammer and release the bolt. Any way to fix this or do i need a new solenoid and if so where can i get one i tried rap 4 havent heard back from them. Btw its a 2005 spyder xtra
|
|
#2
|
||||
|
||||
|
you may be able to shim the solenoid
|
|
#3
|
||||
|
||||
|
I tried a washer in between the solenoid and frame is that the right place? and how thick do u recommend.
|
|
#4
|
||||
|
||||
|
yeah thats what i was talking about. i had the same problem i used a penny and a dime if i remember correctly. you may just need to experiment with it
|
|
#5
|
||||
|
||||
|
Ok ill give it a shot i noticed when i pushed it in by hand it was working so i tried a washer. But no luck with the washer maybe its to thick or thin. Does anyone know where to get a new solenoid though?
|
|
#7
|
||||
|
||||
|
OLDIRONMUDDER ,
Your talking about the spring in the lower chamber, not the bolt chamber correct? If so i put the weakest spring in from my kit and back it all the way out to double check. I had the handle off the gun and it wouldnt collapse the hammer. Im pretty sure the solenoid is just worn out and i need a new one. |
|
#9
|
||||
|
||||
|
9 v just put a new duracell 20 dollar one in the solenoid clicks but as i watch it. It doesnt fully engage releasing the hammer. Tried to shim it with washers and coins but in order for it to engage enough it wont re-cock. Want to make sure its the solenoid before i spend 40 plus on one.
|
|
#10
|
||||
|
||||
|
you need a 9.6v battery
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|