Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Discontinued Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 08-19-2010, 12:04 PM
noodles4u noodles4u is offline
New Guy
 
Join Date: Mar 2010
Posts: 3
Default Tadao VS board into IPI eframe?

I was looking at the choices of boards out and I saw the Tadao VS board is pretty cheap. (can be had with an eye harness for 40 bucks). Even if isn't the most feature rich board, it'll do for adding some new fun to my Imagine Digital LED.

Anyways, I was wondering if anyone has swapped the Tadao VS board into an eframe. I know the 'noid and battery harnesses will match up, but I'm unsure about the trigger connection, which has 3 pins instead of two.

Anyone know if it's pretty much plug and play (with simple rewiring) or do i have to use a different microswitch?
Reply With Quote
  #2  
Old 08-19-2010, 12:10 PM
DFSniper's Avatar
DFSniper DFSniper is offline
Official SOC Short Bus Crew
 
Join Date: Dec 2005
Location: Fairbanks, Alaska
Posts: 8,401
Default Re: Tadao VS board into IPI eframe?

i dont think so. the buttons and charging port dont line up with the frame, and im not sure about the microswitch harness.
__________________
8/23/03 OS KUSA #10898
Spyder to pump conversion tutorial!
Project LP Reposted!

Sales Thread

Feedback

Quote:
(7:11:05 PM) Battlechaser: Did you just slaughter George Clooney and steal his mojo..?
"Death doesn't exist. It never did, it never will. But we've drawn so many pictures of it, so many years, trying to pin it down, comprehend it, we've got to think of it as an entity, strangely alive and greedy."
- from Ray Bradbury's Something Wicked this Way Comes
Reply With Quote
  #3  
Old 08-19-2010, 04:34 PM
noodles4u noodles4u is offline
New Guy
 
Join Date: Mar 2010
Posts: 3
Default Re: Tadao VS board into IPI eframe?

I'm already aware that the bottons and ports don't line up. That can be fixed with a drill. I'm just unsure about the wiring for the trigger.
Reply With Quote
  #4  
Old 09-14-2010, 03:26 AM
big_daddy_d's Avatar
big_daddy_d big_daddy_d is offline
KUSA KREW FOR LIFE BABY
 
Join Date: Dec 2005
Location: Fort Gordon, GA
Posts: 1,801
Default Re: Tadao VS board into IPI eframe?

just get a t board...
Reply With Quote
  #5  
Old 10-16-2010, 09:33 PM
noodles4u noodles4u is offline
New Guy
 
Join Date: Mar 2010
Posts: 3
Default Re: Tadao VS board into IPI eframe?

Quote:
Originally Posted by big_daddy_d View Post
just get a t board...
You know, I was thinking of that too. Then, I can mill the frame for the membrane pad, so it sits flush, or a little bit under.

Also, you didn't answer my question. Your post is almost useless to me.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 07:48 AM.