How to get a straighter shot?

[power_hitter18]

Hey guys,

What is the best way to get a straighter shot out of my RSX?

It shoots with a curve at this point and it kills the range and accuracy of the gun.

My PSI is at 275 and my velocity is maxed out. Or did I turn the velocity the wrong way...?

[ferret15]

you ever see the movie Wanted?

Well its kinda like that

[DFSniper]

what do you mean your velocity is maxed out?

[power_hitter18]

Originally Posted by DFSniper

what do you mean your velocity is maxed out?

The fixture, in which you adjust it is turned all the way and my PSI is at 275.

It shots balls that turn left and right sometimes and it the balls always go up and down.

Just wondering if there is a way to get a straight shot, which is more accurate.

[battlechaser]

Are you using an aftermarket barrel or barrel kit?

And have you chronographed your gun to 300 fps?

[xsvly-fat]

I would suggest matching your paint to your barrel. You can do this buy either getting a barrel kit or by trying different paint till you find one you like.

[DFSniper]

are you using cheap paint?

[power_hitter18]

Originally Posted by DFSniper

are you using cheap paint?

I use the most expensive at ****s..

[power_hitter18]

Originally Posted by battlechaser

Are you using an aftermarket barrel or barrel kit?

And have you chronographed your gun to 300 fps?

1. Stock barrel..

2. I don't have it chroned, just played with it myself, I'm sure it is probably wrong.

[battlechaser]

I'd get it chrony'd to >300 fps and check your paint match. The only thing that really affects accuracy is the paint/bore match. Though if you're on CO2 you'll wind up with wild shots from time to time as well.