Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Mechanical Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-07-2009, 08:11 PM
JumboNuts JumboNuts is offline
New Guy
 
Join Date: May 2009
Posts: 1
Default Vertical Adapter

There are 2 o-rings on it that are #015 80D. I put on new ones and it leaks a lot, the #09 rings. The old ones were all cracked. Is the part defective? it was working for some time. the gun is 3years old only use 5 times
Reply With Quote
  #2  
Old 05-07-2009, 08:35 PM
ferret15's Avatar
ferret15 ferret15 is offline
09 SOTM WINNAR!
 
Join Date: May 2008
Location: Rockford
Posts: 1,088
Default Re: Vertical Adapter

on the outer most o-ring, replace that with a tank o-ring

on the inner o-ring i recommend saving you tank o-rings and just buying a faucet oring from the hardware store.


oh o-rings dry up and need to be lubed up or replaced to continue to hold a seal. I suggest you buy some paintball oil and re-lube your entire gun accordingly so its ready to go with out the worry of it breaking.
__________________
contact me for custom work

Feedback +18/0
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 08:10 AM.