lost a screw

[spoonie]

Out shooting paint to break in my new ACP bolt and timmy detents. Being a newbie I forgot to check bolts tight! MR2 quit shooting... After several WTF's I discovered I was missing a screw that holds the frame on (rear one). I replaced it with the one that holds the stock on. Where can I get some replacement screws? No pro shops anywhere near.

[Modded-Like-Hell]

check www.macrolineguy.com he might sell them

[spoonie]

Thanks for the quick response, MLH. My only online link is my blackberry and his site loads up funky. I'll have to keep lookin'

[slim and shady]

Or just contact kingman

[dizzy]

If they're the same type of screw as other Spyders (non-VS), then this would probably work:

http://firstcallpaintball.com/store/show/115072

It says they're out of stock, but usually they have stuff like that on eBay, so a phone call to them would be a good idea.

If not, like shady said, contact Kingman.

[j053]

try this place http://www.sundragonpps.com/paintbal...epl_parts.html

[OneShotKill]

or go to a hardware store and see what you can find...they should have one/some...

[bigred76]

Spoonie, view this list them decide which you need: http://www.spyder.tv/forums/showthread.php?t=223

Go down to your local hardware store and ask them for that screw.

[spoonie]

Thanks, all. I got a screw from the hardware store. It is shiney with a phillips head but it will work and cost me only 10 cents.

[bigred76]

You can always put some masking tape on the threads and spray paint the head black.