|
|
#1
03-10-2009, 07:52 AM
|
|||
|
|||
Best front grip/expansion chamber
Ok I dont really need an expansion chamber but a tube type replacement of the stock foregrip.
One that maybe has an inlet at the bottom/side... what will I need to screw in the body so that if I fall on it it wont strip the threads out. 
|
|
#2
03-10-2009, 08:06 AM
|
||||
|
||||
|
Re: Best front grip/expansion chamber
You could always weld the stock forgrip to the body. If that broke it would be because of a crappy weld.
You could goto a local machine shop & have them wipe you up something that screws into the factory airline hole then uses the factory holes for the forgrip on top of that. Could build a brace that mounts to the stock forgrip & attachs to the bottom of the frame. I could keep the ideas rolling but Im not......
|
|
#3
03-10-2009, 09:11 AM
|
||||
|
||||
|
Re: Best front grip/expansion chamber
Get a lapco spyder vertical ASA and a gas through grip. The MR1 body adapter will fit into the gas through grip perfectly and i think will do what you are asking.
Here are links to ebay for the two parts: Lapco vertical ASA and Gas through grip Quote:
__________________
MR1: chopped barrel w/ MG barrel shroud RedDot on QD 2" rail Q-loader SP8 mod ACP mr1 terminus bolt Palmer female stab w/Lapco vertical ASA wooden grips and stock MR2 (w/o eyes): 12" J&J ceramic barrel 1st gen Trinity MR2 6-stage expansion chamber for MR2 RedDot on riser rail Q-Loaded! SP-8 mod ACP mr2 terminus bolt Dboys SIR shroud Spec OPS commando stock
|
|
#4
03-10-2009, 09:13 AM
|
|||
|
|||
|
Re: Best front grip/expansion chamber
I'm not talking about a custom job, I'm talking about something like an expansion chamber but with its inlet not at the bottom..
I have just found a deal that mounts to the body with a raidas and all, then you can screw on what ever you want... now to find the EC !
|
|
#5
03-10-2009, 09:34 AM
|
||||
|
||||
|
Re: Best front grip/expansion chamber
Expansion chambers are the pits... get a stabilizer. better in the long run and you will not frustrate yourself with the liquid CO2 in your marker hassle....
Quote:
__________________
MR1: chopped barrel w/ MG barrel shroud RedDot on QD 2" rail Q-loader SP8 mod ACP mr1 terminus bolt Palmer female stab w/Lapco vertical ASA wooden grips and stock MR2 (w/o eyes): 12" J&J ceramic barrel 1st gen Trinity MR2 6-stage expansion chamber for MR2 RedDot on riser rail Q-Loaded! SP-8 mod ACP mr2 terminus bolt Dboys SIR shroud Spec OPS commando stock
|
|
#7
03-10-2009, 09:00 PM
|
||||
|
||||
|
Re: Best front grip/expansion chamber
Get a Palmer's Male Stabilizer and a vertical ASA adapter. The male stab has the airline coming out of the side and not the bottom. Its better than a standard expansion chamber, but it is pricey. You could go with just a expansion chamber that has the air line on the side - that is cheaper.
Cheap ASA adapter - http://cgi.ebay.com/Spyder-Java-Gun-...1|293:1|294:50 Palmers Male Stab - http://cgi.ebay.com/Palmer-Male-Stab...QQcmdZViewItem
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
