installed eyes in ACS MR2

[slim and shady]

ok dont expect any great photography the camera was garbage but maby it will be enough to give you the idea.












ok there are the horrible pics for the one of the feedneck I put a peice of black tape over one side for the picture as I took the anno off a large space on the bottom but you dont want to narrow the side with the tape or it wont hold your detent tight.

Hope that helps guys if I can get my hands on a better camera I will take better pics. I tried to take one of inside the breach but it just kept comming out compleatly white, and not visible.

[slim and shady]

forgot this one



None of this was hard at all and best of all its almost all compleatly hiddin away i just have to make an eye cover for the far side and im compleatly done. The forgrip looks ugly as hell but it works and best of all you dont see any of the uglys when its on the marker.

[bigred76]

Back the camera up some when you take macro pics (close ups). It'll focus better.

Looks real nice!

[slim and shady]

Thanks it really isnt hard you just have to take alot of time drilling through the body. With the tapered breach your bit will just **** off on you if you try to force it. Go slow easy enough to do.

[XSiv Force]

i think i need glass because those pics screwed my eyes up

[slim and shady]

aaahhhh and here comes the stooges what would a project be without you guys? Irish should be ariving any minute now. Though i havnt seen him on here in a very long time. Whats up with that?

[XSiv Force]

Sorry i was stuck in traffic
dont know no sign of him

[bigred76]

I've got an idea for an eyecover for ya that I saw on an Angel. Lemme grab the link for the walk-through using it that was done on PBN. It looks REAL clean, and it's cheap! (if that doesn't perk up your attention, I don't really know what will )

EDIT: Tuh-duh! http://www.pbnation.com/showthread.php?t=2396989

[Modded-Like-Hell]

that looks good...nice now i see how it was done. so the feedneck covers the eye?

[slim and shady]

Thanks red may do that rather then making another set out of thim plexiglass

Also forgot to mention that I had to drill another hole in the back of the trigger frame for the eye on/off button no big deal either.

Edit: missed your post modded like hell. On the one side where the feedneck is thats the cover on the otherside I will make one like I did for the cheif but way smaller and I may incorperate it right into the grip so it all comes off as one.