Spyder Forums  

Go Back   Spyder Forums > Shop Talk - Reviews - Polls > Shop Talk > Air Systems
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 09-21-2009, 12:42 PM
Erlkonig Erlkonig is offline
Member
 
Join Date: Oct 2007
Location: New Hampshire
Posts: 60
Default Ever have an issue getting a CO2 bottle seated?

I just bought a second CO2 bottle and got it filled this weekend. By default I grabbed my "old" bottle to use first when testing. After tinkering and tweaking I thought I would putter with the adjustable ASA to find the best balance point so I figured I would use the new full bottle for a better idea of how it would handle on the field.

I screwed the bottle in, and turned on the gas and...nothing...

I tried with the other bottle a few times and it worked fine each time, but for some reason I can't get the gun to gas up on the new bottle...Everything is identical on the valves on all visual comparisons, I may try to "mike" them and see if there is any minute differences, but I will like if it were that big a difference, it would be fairly obvious in one way or the other...

They apparently had no issues filling the bottle (my wife got it done for me while I was working) and it was definitely empty when I got it and it had definitely been filled now, just not getting anything out of it...

Both bottle are Pure Energy 20oz bottles.

Any suggestions or insights would be great ;-)
Reply With Quote
  #2  
Old 09-21-2009, 01:08 PM
oldironmudder's Avatar
oldironmudder oldironmudder is offline
EM1 Tech guy
 
Join Date: Oct 2006
Location: Arkansas River Valley (left side)
Posts: 1,817
Default Re: Ever have an issue getting a CO2 bottle seated?

I would try manually pushing the pin valve down just to make sure it does work. Or do you have another ASA to test with?
__________________
F/S/T:
WTB: WTB List
Feedback: 120+
Reply With Quote
  #3  
Old 09-21-2009, 04:04 PM
Erlkonig Erlkonig is offline
Member
 
Join Date: Oct 2007
Location: New Hampshire
Posts: 60
Default Re: Ever have an issue getting a CO2 bottle seated?

So I can home and gave it some more inspection since I didn't have time to do a real thorough check...I tried screwing the bottle into my back up/loaner marker, an '08 WGP Worr Machine, and nothing.

I unscrewed the bottle and went in to get the other bottle for a side by side comparison. The old bottle when I depressed the pin using the cap gave a big blast as would be expected, the new bottle however only gave a brief puff when I hit the right spot during the valves travel. I found the spot and held it for a bit letting the CO2 pass out. After a bit it began spitting out little chips of CO2. After this continued for 30 seconds or so there was suddenly a big increase and it acted more like the known good tank. I screwed it in to the WGP marker and it worked fine. So I was thinking that perhaps it had just been overfilled or something given that in a vertical position it was spitting chips and that the more I let out the better the flow got.

I screwed it into the MR-1 with the ANS ASA and it gassed the gun up to ~280psi so I assumed I was good to go. However as soon as I pulled the trigger the pressure dropped and it acted as though I had turned the gas off. Thinking it was the marker I took it off and put it back on the WGP, but still was getting nothing out of the tank.

I took it off and fiddled with it a bit by depressing the valve and holding it down to let gas escape for a bit. Screwed it back into the WGP and it was working fine for the remainder of the testing. I did not remove it from the WGP to test it on the MR-1. I figured why mess with it since I had another bottle that was working fine on the MR-1.

So I thought I had it figured out as overfilled, but now I am not so sure...
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 05:46 AM.