Need your Expertise

[Doomfarer]

Greetings all,

Well heres something thats got me worried and I'm hoping someone out there will know what bolt this is. Cuase it sure dosent look like the ACS bolt in the blow up diagram from the owners manual.







I placed the bolt on the body of the gun so you could see it better.

[Hossy]

I think its missing a cocking knob.

[Doomfarer]

This is a top cocking bolt

[shark]

sure looks like the right one to me

[oldironmudder]

If you look in my ACS break in guide, you could compare the bolts. Look in my sig.

[Hossy]

It is a top Cocking Bolt.
He is missing the cocking knob on the top.
it fits, and will work without the knob if you can find another way to manually cock it.

[XSiv Force]

all of it

[Doomfarer]

Greetings all,
Myster solved turns out this is a JAM Enterprises Dragun TES Anti-Chop Bolt and as Hossy pointed out I was missing the top cocking knob as it was flying off the marker ever time i would fire it. I read either here or in another forums(pbnation?) that if i used a hammer and struck it a time or 2 that would fatten the end but I'm not to comfortable with that solution. Now use an alen key that I drilled a small hole in to run a lanyard through which i attach to my tac vest.

Thank you all for you responses.

[dan567]

thats because that bolt is the acs bolt so its anti chop don't worry i have the same gun and it is the same bolt. And too Hossy, he has takin out the top cocking nob, its the only way to get the bolt out