MR1 reg?

[QuiGonKen]

does the MR1 come with a regulator?

[Voodoo27909]

no

[ooglieboogliebob]

nope ... only a few spyder gun comes with a regulator i believe.. Fenix and the Rodeo qualify as on .. even still the quality isn't that great

[PWNDuAgain]

You dont need a regulator anyway. They are over rated. Look at the Tippman's they don't have regulators and work great!

[Hob Hayward]

Reg's are great to have. don't listen to MR. Tippmann obsessed here, hes biased. Not that the rest of us are biased towards spyders or anything . Stock tippies and stock spyders are comparable in performance.

[yamaha cow]

yah if u want a reg on your mr1 u can get a vertical adapter from hardware stores paintball pro shops and online I think tapco or something makes them.

[Ace24]

Originally Posted by ooglieboogliebob

nope ... only a few spyder gun comes with a regulator i believe.. Fenix and the Rodeo qualify as on .. even still the quality isn't that great

It wasnt a "reg."

All it was, was a gas through chamber that simulated a reg only in looks. No Spyder comes with a reg. (The VS's have what they call a "reg" but it's more of a ASA/reg.)

I used to have a Fenix. There was no way to control the amount of air that passed through the gas through chamber. Therefore it is not called a regulator.

Putting a regulator on an MR1 is pointless. You cannot make a MR1 low pressure without some SERIOUS modding to the body it's self. There is no LPC, no VA, and no place to put either of those. There is also no way to screw in a regulator. You can, however, put in one of the old style male threaded gas through chambers on it, substituting for the metal "shroud" that goes around the hose that leads into the body.

[cyberthrasher_706]

what about using a tank regulator?

[Ace24]

What do you mean? HPA tank's have regs on them just to lower the outgoing pressure to 800PSI (for high pressure and I think 400 for low).

[Hob Hayward]

Ah, but you are wrong Ace, there were several spyders with bottomline regs. Including the rodeo and fenix.