PMI Problems

[XSiv Force]

Does anyone have a diagram for a pmi pirahna? If so post it please.

If not, What the heck is up with my pirahna when air is coming out of the trigger

[XSiv Force]

And this is its brother



For some reason i can not figuer out the problem

[The Pumper]

Check the oring on the hammer.

[XSiv Force]

i dont think thats it because i took the entire bolt and hammer system out of each gun and replaced them with each opther and it still happened to the black one.....Could it be the valve

[The Pumper]

Did you check all the orings?

[XSiv Force]

yep all arte new or in good condition

EDIT: Found out the issue from PBnation it is in fact what i thought it was exactly the Valve well sort of the Valve O-Rings. NEW QUESTION: HOW DO I GET THE VALVE OUT?!?!?!?!?!?

[vikingshadow]

Assuming it's similar to a spyder:

Take the grip off and there should be a brass screw (or regular one) towards the front on the bottom tube that holds the valve in place. Unscrew it.

Remove the hammer and spring assembly from the back, then remove that big honking thing in the front. Take a battle swab, or a wooden spoon and put it in bottom tube at the back of the gun - push the valve out the front of the gun.

To reassemble, go in reverse of what I told you.

[The Pumper]

Yep. Battle swab is what I use. Works like a charm!

[XSiv Force]

alright thats what thought, i just cant seem to get the back screw to the trigger off of the gun so the trigger frame wont come off....im going to have to hack or dremil it off

[TheDarkShadow]

Originally Posted by XSiv Force

alright thats what thought, i just cant seem to get the back screw to the trigger off of the gun so the trigger frame wont come off....im going to have to hack or dremil it off

WD-40 is your friend