Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 02-26-2006, 11:59 PM
spyderman spyderman is offline
New Guy
 
Join Date: Dec 2005
Posts: 3
Default electra 05 problems

ok guys
i havew the electra and everytime i fire this thing it blows back up the hopper
and burst balls all the time in the hopper and hopper feed neck and also the barrel.
i use the empire reloder b hopper

i am also using this marker as it came straight out of the box
is there an after marker bolt? if so where can they be got?
can you put seals on the acs bolt to minimise or stop blowback?

bear in mind i live in great britain and getting parts for this gun is nigh on impossible so web addys would be appreciated if you have them

cheers
Reply With Quote
  #2  
Old 02-27-2006, 05:20 AM
shunut's Avatar
shunut shunut is offline

Respected, period.
 
Join Date: Dec 2005
Location: Gilbert, AZ
Posts: 5,359
Default Re: electra 05 problems

Ok, first the blow back issue. With the Reloader be on there you really shouldn't be having blowback problems since it is a force feed loader, meaning there is constant pressure on the paint. It is possible that the paint you are using is brittle and the Reloader and blowback combined are too much for it, I'm not sure.

As for bolt, you can't really but seals on the ACS bolt, if its delrin. The aluminum one already has them on it. There are many other bolts you could put in there but I'm not sure if they will solve your problems. However a couple good bolts are the AKA Lightning Bolt, the ACP Blue Bolt or if you could find a used one because they aren't manufactured anymore the APM Tigershark Bolt is good.

I hope I helped some, if not I'm sorry.
__________________
Viva La KUSA!

KUSA Feedback

2006 Non-Spyder of the Year - The Shunut Spimmy


Shunut Creations
Reply With Quote
  #3  
Old 02-27-2006, 03:29 PM
ooglieboogliebob ooglieboogliebob is offline
Marine Corps.
 
Join Date: Dec 2005
Location: Pasadena, MD
Posts: 2,565
Default Re: electra 05 problems

umm... im thinking it's the detent .. since i had that as a problem before ...
Reply With Quote
  #4  
Old 02-27-2006, 04:21 PM
bird bird is offline
Bird Of Prey in de house
 
Join Date: Dec 2005
Posts: 26
Default Re: electra 05 problems

Same problem I get all the time. Even with my halo b, the blow back is shredding the balls in the hopper. and even blowing the lid off my hopper once. -_-;;
Reply With Quote
  #5  
Old 02-27-2006, 05:00 PM
ooglieboogliebob ooglieboogliebob is offline
Marine Corps.
 
Join Date: Dec 2005
Location: Pasadena, MD
Posts: 2,565
Default Re: electra 05 problems

.... thats tremendous blowback ... try a hard valve spring with a light main spring .. should reduce it a bit ...

Also, try lubing you gun and polishing it .. Also, drill holes in your feedneck so the excess air goes out the tubing
Reply With Quote
  #6  
Old 03-01-2006, 08:20 AM
spyder05guy spyder05guy is offline
Member
 
Join Date: Feb 2006
Posts: 28
Default Re: electra 05 problems

Also, if possible, try not to insert your hopper all the way down the feed neck. That way air can escape from the slot that is in the feedneck just below the thumb screw. The Detents is a good idea as mentioned in this thread earlier. I was having bad chops too until i went to the Halo B with the victory board, but you hopper is more than effecient.
Reply With Quote
  #7  
Old 03-01-2006, 03:07 PM
ooglieboogliebob ooglieboogliebob is offline
Marine Corps.
 
Join Date: Dec 2005
Location: Pasadena, MD
Posts: 2,565
Default Re: electra 05 problems

umm... well you also should probably rather than the feedneck not being all the way in .. drill holes in the feedneck to relieve the blowback
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 08:13 PM.