MR2's consistancy

[bigred76]

www.palmer-pursuit.com is the manufacture of the Palmer's Stabilizer regulator.

[propaintballer2378]

Ok, should I get a palmer stabalizer are they better than a CP reg? and what pressure would I want my MR2 running at?

[propaintballer2378]

I want my gun to be as consistant as this- http://www.youtube.com/watch?v=5SPPlt2Zj4Q

[bigred76]

Palmers > CP for CO2.

I'd start it off at 600psi with the velocity adjuster 2 turns in, and check it over the chrono as you start lowering pressure. When it starts fluctuating, bring it up 50psi and use that. Just get it in the general range of the FPS you need to shoot at the field, and use the velocity adjuster on the back to fine tune it.

[propaintballer2378]

I have compressed air so what is better?

[propaintballer2378]

O, and does any one know if double feeding causes chops?

[bigred76]

CP and yes, it sometimes can if the second ball doesn't feed fully. Tighten down the detents and you shouldn't have that issue.

[propaintballer2378]

That would be my chopping issue then. How do I tighten my detents? and I was reading reviews and the Palmer stabalizer sounded better have you tried both out?

[propaintballer2378]

Nvm I read the CP reviews but is the CP in line regulator and the CP grip regulator the same thing?

[bigred76]

Erm, yeah. Same regulator. I own both and prefer the Palmers for use on a Spyder. Bit more rugged and it looks better.

To tighten the detents, screw down the detent covers some more.