I Hate My Vs3 If U Have Any Suggestions Post Here

[SUNNYboi]

Originally Posted by bigred76

To SunnyBoi:
Pretty much all you do is use it. After about a case, case and a half, the regulator will start being more consistent. It's a gradual change, so you won't notice it right away, but after about a quarter to half year of use (depending on how often you use it), you will be shocked when you compare to the numbers you were getting when you first chrono'd.

Thanks for the info

[bigred76]

Originally Posted by Tech Steve

they test with spyder paint, using halo's and fasta's, and using compressed air...

Ok, I was thinking that, I'm just making sure in this case it was that. My bet is that the user (pb_king) is using bad paint (most likely too large of a bore size), CO2, and a Revvy or the like. Something he is using is not up to par, otherwise this would not be happening.

NP, SunnyBoi...

[shunut]

I'm not trying to be mean or anything but if this is your second VS3, neither worked and both have the same problem, I'd have to say its something you are doing, or not doing.

Take your entire setup down to your local paintball shop. Tell them you can't get it to work and have them set it up with your stuff. Make sure they put paint or reball through it so you know indeed that it does work.

[pb_king]

Originally Posted by bigred76

Ok, I was thinking that, I'm just making sure in this case it was that. My bet is that the user (pb_king) is using bad paint (most likely too large of a bore size), CO2, and a Revvy or the like. Something he is using is not up to par, otherwise this would not be happening.

NP, SunnyBoi...

OK BIGRED76

YOU WENT TO FAR IM NOT THAT STUPID TO USE CO2 ONA MACROLINE HOSE
AND I USE HALO WITH V35 BOARD AND MARBELZIERS

I HAVE BEEN PLAYIN FOR LIKE 2-3 YEARS

[bigred76]

If you don't tell me what it is (I believe I asked 2 or 3 times), then I can assume that you don't know and make my own speculations.

And btw, what would CO2 do to a 9,000psi rated macroline? I've never had an issue with it at all... and I've been using macro with CO2 for YEARS.

Thanks for letting me know that you're using HPA and a Halo w/ V35 and Marbs. That helps me to rule out the paintballs being too large for the marker. Up the regulator to 300psi, and screw in the velocity screw some more.

[shunut]

Did you yourself do anything to the marker? Take it apart at all?

I had a similar problem with my Shutter, turned out the bolt was upside down.

[dmurray074]

You said the balls are rolling out the barrel??? Do you have detents?

Your not being very clear and everyone is trying to help you just tell everybody your setup and exactly what is happening (in detail) then, and only then somebody might be able to help you.

[bigred76]

Thanks Murray, glad to know that I'm not going crazy thinking I asked something I didn't!

[sciphan]

http://www.spyder.tv/forums/showthread.php?t=15487

Read this post. many vs2's and vs3's have an issue with the detent grooves on the bolt not being milled properly. This can cause all sorts of headaches and unfortunately it is a difficult problem to diagnose unless you know what you are looking for.