I Hate My Vs3 If U Have Any Suggestions Post Here

[VS3 Sniper]

Originally Posted by bigred76

Honestly, I don't think you want to get this marker fixed, you're just here to bash on Spyders. If you have done everything you say you have done, then there is no reason other than owner-error to account for. In which case, it is no longer the marker's fault, it is your own.

My thoughts excatly tim.

[pb_king]

Originally Posted by VS2 King

It Sounds To Me That You Need To Break In The Regulator. All Vs2 And Vs3 Have To Do This. With The Balls Not Coming Out. Maybe The Hopper Isnt On? Idk But Like You Said If It Was Teched By Kingman There Shouldnt Be Anything Wrong Unless Its You That Is Doing Something Wrong.

ok well the hoppers on and even the first vs3 i had before they gaev me an new one didnt work.


HOPPER IS ON

all i do is screw in barrrel attach hopper fil hopper turn on hopper attach barrel condom the attach tank turn reg on in that order and when i turn it on at chroo it is in semi auto mode with eyes on so i think there's a problem with the parts that are being raplced in the marker



and to bigred76 im not here to bash on spyders just to get mine fixed so i can sell it without the next person having many problems

[pb_king]

bolt moves but paint just clogs in barrel or rolls out when it never works

[king-man]

Do you live near where you get it serviced? If you do, go in there and ask them to test it and if it works for them obviuisly somethin of yours is wrong, if it doesn't for them they'll fix it, my vs3 reg kept chopping orings so I sent off the reg and they re built wha was wrong it still works to this day, are your frame screws on tight enough

[bigred76]

What PSI is your regulator set to? Too low of a pressure (it needs 250psi) will cause it to do that. Also, screw in the velocity screw some more. It also might be the paint to bore match, with you having ginormous balls trying to go through that barrel.

To SunnyBoi:
Pretty much all you do is use it. After about a case, case and a half, the regulator will start being more consistent. It's a gradual change, so you won't notice it right away, but after about a quarter to half year of use (depending on how often you use it), you will be shocked when you compare to the numbers you were getting when you first chrono'd.

[pb_king]

yeah i live like 2 miles and they fix show me it works and test it in front of me then i take it home put in bag and when i go to chrono at field after charging the battery it doesnt work

[pb_king]

yeah around 250 psi

[king-man]

do they test it withtheir stuff or yours?

[bigred76]

What paint? Do they shoot the marker at Kingman using their paint, or do they only dry-fire it?

You're lucky to live so close to them... If I lived that close, I'd try to get a job there, LOL!

[Tech Steve]

if they test it and show you that it works, it might be something your doing or using... they test with spyder paint, using halo's and fasta's, and using compressed air...