I Hate My Vs3 If U Have Any Suggestions Post Here

[shunut]

Slow down man, lets discuss one thing, your problem.

You go to chrono it, and it doesn't work. It just shoots air no paintballs come out? Thats what I'm getting from what you are saying.

[pb_king]

yeah exactly but it shoots air but no paint when on another marker the hoppper works fine

sometimes it just drops and chops the balls and the velocity and pressure are fine so i think it is just a crappy gun

[bigred76]

If that's your opinion, you can guess what the marker's opinion of you is... Relax, pop a squat.

So, we have a gun that is firing fine with air, and has chops.... Sounds like it needs a recharge for it's battery and the hopper needs to be turned on. It might also be the eyes, are they clean? If you chopped, it could be in one of three cases: the eyes were off, the eyes were on but the marker was forced to fire, or the eyes were on but they're dirty and paint's covering them making the marker "see" a ball in the breech. Clean off the eyes, and make sure they're on.

What hopper are you using on it? If it's a gravity fed hopper (shake 'n bake), then it might just be jamming up with the paint, and that itself isn't feeding. Nothing you can do about that except not fill it all the way and shake the living hell out of it when it isn't feeding.

Shunut, you should be in bed... Go on off, I got this one!

[pb_king]

the thing is brand new and recently teched from spyder why doesnt it work right its just been teched and a brand new gun shouldnt break so i doesnt even fire sometimes with air

the battery in gun is always fully chargeeed

hopper batts are replaced evrytime after use


eyes are clean

[shunut]

What type of loader are you using?

What mode do you have the marker in?

Are you using Compressed Air or co2?

What type of paint are you using?



And Tim, how do you know I'm not in bed?

[bigred76]

Eyes are on?

Honestly, I don't think you want to get this marker fixed, you're just here to bash on Spyders. If you have done everything you say you have done, then there is no reason other than owner-error to account for. In which case, it is no longer the marker's fault, it is your own.

Relube the marker COMPLETELY including the regulator, following the manual, and set it into the default settings listed per the manual. Set the velocity adjuster flush with the back of the marker, and set the regulator pressure to 250psi.

[DisIsMyUsername]

sell to me thnx

[VS2 King]

It Sounds To Me That You Need To Break In The Regulator. All Vs2 And Vs3 Have To Do This. With The Balls Not Coming Out. Maybe The Hopper Isnt On? Idk But Like You Said If It Was Teched By Kingman There Shouldnt Be Anything Wrong Unless Its You That Is Doing Something Wrong.

[SpyderMan723]

Idk how VS internals are setup, but are the bolt/striker connected? If they aren't then the striker is probably just hitting the valve and not moving the bolt because they arent in sync

[SUNNYboi]

Originally Posted by VS2 King

It Sounds To Me That You Need To Break In The Regulator. All Vs2 And Vs3 Have To Do This. With The Balls Not Coming Out. Maybe The Hopper Isnt On? Idk But Like You Said If It Was Teched By Kingman There Shouldnt Be Anything Wrong Unless Its You That Is Doing Something Wrong.

How do you break it in? My VS3 is coming in tomorrow and I want to take really good care of it.