Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Discontinued Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 03-21-2008, 08:20 AM
paintmaster's Avatar
paintmaster paintmaster is offline
That's my baby brother.
 
Join Date: Jan 2006
Location: Casa Grande, AZ
Posts: 241
Default What do i need to install this...

ok I ahven't been on these forums for quite some time now. I just recently purchased a vs2 and am looking to upgrade the regulator. I want to put this on it http://store.customproducts.us/index.cfm?fuseaction=catalog.prodInfo&productID=22 &categoryID=4.

So my question is what will I need to install this on my stock Spyder Vs2. I have been hearing you need a new asa and all that stuff but I don't know exactly what you need. So can someone just tell me exactly what I need to install this on my gun.

Thanks,
Paintmaster
__________________
Imagine Owners Club V2 Member 15
Reply With Quote
  #2  
Old 03-21-2008, 09:12 AM
Hossy's Avatar
Hossy Hossy is offline
Has Been
 
Join Date: Apr 2006
Posts: 3,398
Default Re: What do i need to install this...

What you are considering buying is called a CP shorty.
If you are using HPA id suggest getting macro fittings and getting a new ASA.
IF you are using C02 you will still need a new asa, but id suggest using the steel braided hose
__________________

Quote:
Originally Posted by HelpDeskHustler View Post
It just occurred to me that "bad company" may be a terrible name for a team sponsored by only one company.
Reply With Quote
  #3  
Old 03-21-2008, 09:24 AM
paintmaster's Avatar
paintmaster paintmaster is offline
That's my baby brother.
 
Join Date: Jan 2006
Location: Casa Grande, AZ
Posts: 241
Default Re: What do i need to install this...

I will be using HPA.
So what your saying I will need is an ASA, new Macro fittings, and Macro line?
__________________
Imagine Owners Club V2 Member 15
Reply With Quote
  #4  
Old 03-21-2008, 09:50 AM
bigred76's Avatar
bigred76 bigred76 is offline
Resident *******
 
Join Date: Dec 2005
Location: San Jose, CA
Posts: 6,228
Default Re: What do i need to install this...

And a new fitting for the front block. The stock front block uses backasswards "proprietary" threading, and you'll need to get something like this to make it for the correct threads.

If you get a new regulator, then the stock ASA/reg might have enough obstructions when not used as a regulator to restrict the flow to the new regulator, thus starving your marker and killing recharge rates at high ROF's. Macroline is merely a preference choice, but keep in mind that you will need to get a new hose anyways (the threading for the stock hose is metric and the threading for everything else is NPT). HobbyHorse here and on PBNation can hook you up with a good deal on some macro, I believe it was like $12 or something for a complete kit after his flat rate shipping. Here's a link to his website.
__________________
SOC (+41, -0) | PBN (+12, -0) | New PBN (+20, -0)

URT... Ultimate Resource Thread!

The [OFFICIAL] Manual Thread!

BigRed Photography

Quote:
Originally Posted by Muddy Taco
ya my vagina hurts sometimes to
Reply With Quote
  #5  
Old 03-21-2008, 10:15 AM
paintmaster's Avatar
paintmaster paintmaster is offline
That's my baby brother.
 
Join Date: Jan 2006
Location: Casa Grande, AZ
Posts: 241
Default Re: What do i need to install this...

Thanks for all the replies guys. I have a good idea of what I need now and am gonna go ahead and prucahse the Reg and all the above said stuff. If I need any help putting any of this stuff on I will be sure to ask you guys.
__________________
Imagine Owners Club V2 Member 15
Reply With Quote
  #6  
Old 03-22-2008, 09:10 AM
king-man's Avatar
king-man king-man is offline
Don't dis spyder cuz ill dis you about your gun
 
Join Date: Mar 2007
Location: Uniontown, KY
Posts: 945
Default Re: What do i need to install this...

you could also consider a front block like this one here, i like the fornt block my self but if you go with that id suggest a a long cp reg
Reply With Quote
  #7  
Old 03-24-2008, 12:37 PM
Tech Steve's Avatar
Tech Steve Tech Steve is offline
Knows all... Fixes all!!!
 
Join Date: Jan 2007
Location: San Bernadino County
Posts: 177
Default Re: What do i need to install this...

you need to either use a reg adapter for the stock vertical adapter or purchase a new vertical adapter (make sure it's made for the vs markers)...
__________________
LA Onslaught Team Website http://paintballwebpages.com/Token
Bandits Splat Paintball www.banditssplatpaintball.com
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 02:04 AM.