imagine won't recock itself

[modifiedspyderimagine04]

oh ok i see i'll try and look for one

[tumtum00]

hey man start with the velocity adjuster turn it in if it still doesn't recock itself, try harder spring, if not that check valve o-rings, and also you sear shouldn't be wore out, but when you shoot it does it keep firing til you take air off of it, or not recock, if is the trigger frame it wouldn't stop, it would just keep shooting in a very rapid, fully auto mode, but i would probably say it is a velocity issue, or spring. lmk if i can be of any help to ya.

[tumtum00]

oh yea and like said earlier hpa is the way to go, not co2

[modifiedspyderimagine04]

ok i changed the spring on my gun and it fires just fine now thanks how ever i am thinking about changing from co2 to hp air but to fill it i would have to drive 30 miles or into the next state to fill a tank up

[tumtum00]

Originally Posted by modifiedspyderimagine04

ok i changed the spring on my gun and it fires just fine now thanks how ever i am thinking about changing from co2 to hp air but to fill it i would have to drive 30 miles or into the next state to fill a tank up

well i have the same problem i got two 72/3000 tanks and i fill them up out of a scuba tank it is like a 80cf tank 3000psi and i get about 8 good fills before it won't fill past 2000 psi but still take the tank with you and you can use it there to fill below 2000 and still get alot of shots that way, the tank costs about 6 bucks to fill up, you can find used tanks for less than 100. That method works best. I have an ion and out of a 72/3000 tank i get around 1000 shots, it operates at a very low pressure around 150psi where your imagine operates much higher, but you will still get alot of shots out of one tank probably 600-800. i hope this helps you.