I need HELP with this hpa tank i bought plz!

[xxcarlosxx]

ok, so i just bought this pure energy 48 ci 3000psi tank from my friend... i noticed that thepart on the top was chipped off... i dont really mind if its messed up because i just payed $10 for it.. but i was wondering if it is going to be a problem? i put lots of pics so u guys could see if its in good condition... im a noob so any help would b great thnxs...

[XSiv Force]

I think so long as the oring is there it should be alright. The oring is what keeps the air from seeping out

[xxcarlosxx]

should i use loctite before i screw the top part back on the tank?? cuz i read sumwere that its not needed... i just wanna now
also.. i almost sure it works but i just wanna make sure.... will this tank work on a spyder pilot acs?? its stock except for a few things that i listed in my sig

[bigred76]

No, don't loctite the top bonnet!!! Just screw it back on after lubing everything with paintball oil, and screw the set screws on the side in. I'd personally put some DOW55 on the oring before I screw it in next time. I'll see if I can find the manual for your tank, I remember having it when I used to own a PE, but I don't remember where I put it.

Edit: Here it is: http://www.paintballsolutions.com/05..._regulator.pdf

[xxcarlosxx]

ok thanks for all the help guys... uve been great help. now imma go lube it. pzz



oh btw!!! does this fit this???
->http://www.zephyrpaintball.com/produ...ci_ _Red.html

->http://www.zephyrpaintball.com/produ..._Pressure.html

[deano 177]

Originally Posted by bigred76

No, don't loctite the top bonnet!!! Just screw it back on after lubing everything with paintball oil, and screw the set screws on the side in. I'd personally put some DOW55 on the oring before I screw it in next time. I'll see if I can find the manual for your tank, I remember having it when I used to own a PE, but I don't remember where I put it.

Edit: Here it is: http://www.paintballsolutions.com/05..._regulator.pdf

I thought that paintball gun oil(petrolium based) is bad to use on HPA stuff because of the reactions and the blowing up?

[bigred76]

"lubricate both piston “O” rings using Air Tool Oil." Straight from the manual. Paintball oil and air tool oil are practically the same stuff. As long as those are the only orings that you oil, I don't see why it would affect it. That's on the 850psi side of the regulator, not the 4500psi. The fill nipple is what you have to worry about. I always put a smidgen of DOW55 on my fill nipples when I first install them, and have NEVER had an issue with it sticking, leaking, etc. And it hasn't blown up on me as DOW55 is made of different stuff than paintball oil.

It MIGHT fit, but you'd have to stretch it to fit if it will... I'd recommend looking for a pure Neoprene cover that'll definitely stretch to fit.

[deano 177]

Originally Posted by bigred76

"lubricate both piston “O” rings using Air Tool Oil." Straight from the manual. Paintball oil and air tool oil are practically the same stuff. As long as those are the only orings that you oil, I don't see why it would affect it. That's on the 850psi side of the regulator, not the 4500psi. The fill nipple is what you have to worry about. I always put a smidgen of DOW55 on my fill nipples when I first install them, and have NEVER had an issue with it sticking, leaking, etc. And it hasn't blown up on me as DOW55 is made of different stuff than paintball oil.

It MIGHT fit, but you'd have to stretch it to fit if it will... I'd recommend looking for a pure Neoprene cover that'll definitely stretch to fit.

Ok red, thanks for clarifying that. I didn't look at the manual. I just didn't want someone getting the wrong impression and dumping petrolium based lube into the tank.

[bigred76]

The only access to the 4500psi side of the tank on that model regulator is via the fill nipple, burst disk, and the threads inside the tank. He could put a whole bottle of oil on that part and it wouldn't do a damn thing 'cept get oil everywhere.