Co2 Lekaing into chamber-into barrel

[Pbller.Burger]

I cleaned my marker cause it chopped about 20 ball on full auto mostly old paint but i cleaned it and put it together i think exactly how it goes but i keep getting a very consistant flow of co2 out the barrel and not even pulling the trigger is a oring broke in the chamber or what..... I mean i followed the Step guyed that comes withthe gun... and well im stommped and im playing sat-sun-mon all day trainning for march tourny PLEASE HELp u can reach me at Burgerbutt@mchsi.com Thanks. Or just send me a replie.:

[h3ctor]

Check your valve and cup seal + spring. Mine did that and it was because the cup seal was damaged. I just replaced it. But u can just try taking it apart and putting that section back together, that usually magically works. O and make sure ur screw holding the valve is tight, not overly tight but ya...

[Voodoo27909]

Bolt in upside down? Paint on the cup seal?

[Pbller.Burger]

Yea i figured it was the cup seal and what suck no one around here COlumbus GA sales em.. So im dooked out the AS* but thanks alot guys!

[Pbller.Burger]

UM i went to hobby town and igot a cup seal and it still leaks and i check everything all oring look fine... i mean help! i was lucky yesterday it rained but today we start at 12 and its 11:20!!!!!!!!1

[PandaTruenoGTS]

is your valve in backwards? try taking the valve out and turning it around.

[Pbller.Burger]

no.... doesnt work, i watch video and id id eactly what that guy did so i gess im just sccrewed