Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Discontinued Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #11  
Old 01-24-2008, 03:40 PM
Blue Spyder Blue Spyder is offline
Member
 
Join Date: Jan 2008
Posts: 49
Default Re: More Cocking Problems :(

So how do I fix the regulator to let me shoot fast?
Reply With Quote
  #12  
Old 01-24-2008, 03:42 PM
Blue Spyder Blue Spyder is offline
Member
 
Join Date: Jan 2008
Posts: 49
Default Re: More Cocking Problems :(

So how do I adjust the regulator to let me shoot fast?
Reply With Quote
  #13  
Old 01-24-2008, 03:48 PM
VS2 King's Avatar
VS2 King VS2 King is offline
The King Of All VS2's
 
Join Date: Jun 2007
Location: Pennsylvania
Posts: 617
Default Re: More Cocking Problems :(

You Cant Right Now You Have To Wait Till It Is Broken In.
__________________
SOC FeedBack +11/-0
PbNation Feedback +6/-0

[FS/T]Core2Quad Rig

*!VS2 Owners Group!*

From PbNation
"This forum requires that you wait 30 seconds between searches. Please try again in 32 seconds."
Reply With Quote
  #14  
Old 01-24-2008, 03:56 PM
king-man's Avatar
king-man king-man is offline
Don't dis spyder cuz ill dis you about your gun
 
Join Date: Mar 2007
Location: Uniontown, KY
Posts: 945
Default Re: More Cocking Problems :(

the stock regs arent really that good even when they are broken in, but if you dont have the money to upgrade. get your bottle on, take the gun to 280ish psi and just dry fire like crazy until your gun runs out of air. do this through a good 2000 shots quik will have it broken in in no time. making it strive to recharge so quik will break it in alot quiker,after youve got it broken in 250 shouldnt be a problem
Reply With Quote
  #15  
Old 01-24-2008, 04:56 PM
Blue Spyder Blue Spyder is offline
Member
 
Join Date: Jan 2008
Posts: 49
Default Re: More Cocking Problems :(

How much would a good new reg cost and do you have any links
Reply With Quote
  #16  
Old 01-24-2008, 05:00 PM
Doc77's Avatar
Doc77 Doc77 is offline
Dremel Master
 
Join Date: Jan 2008
Location: Chicago
Posts: 97
Default Re: More Cocking Problems :(

Quote:
Originally Posted by spray and pray
If none of that works open up the reg, throw some oil on the orings, and take out the little gold filter.
I'm assuming that you're new to the VS2 so let me explain what S&P is saying. You don't need to open up the reg/ASA (remember, it's a combo on the VS2) to remove the gold filter. The gold filter is not necessary when you're running on HPA, which I assume you are. To remove the gold filter, just disconnect the macroline fitting from the ASA/reg using a 12mm wrench. The filter sits in between the fitting and the ASA. Just tilt and it will slide right out.

Just so you know how to diagnose recocking problems in the future, the recock is basically when the striker catches on the sear. If it doesn't recock, it's probably due to not enough air pressure (turn up the psi) or too much friction between the stricker and lower tube (clean out the tube, oil the o-rings). You can also try putting a few drops of oil (e.g. Gold Cup) into the ASA (put it on the end where the tank screws on) and dry fire to get the oil through all the lines. Check out swoosh's VS thread (or is it sparky's...I forget which name he uses here). He answers most the FAQs on that thread.

http://www.pbnation.com/showthread.php?t=2498556
__________________
DM7 - Shinoobi Edition || VS2
Reply With Quote
  #17  
Old 01-24-2008, 05:06 PM
Doc77's Avatar
Doc77 Doc77 is offline
Dremel Master
 
Join Date: Jan 2008
Location: Chicago
Posts: 97
Default Re: More Cocking Problems :(

Quote:
Originally Posted by Blue Spyder
How much would a good new reg cost and do you have any links
A new reg can run anywhere from $30-60. But since the stock one on the VS2 is also the ASA, upgrading the reg means that you have to get a new on/off ASA as well. Here is the reg that I have

http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=XO-qF8SwGWCqCYMpH0pqv855FICPBMRus_0=?ProductID=efmsFA Y7a0QAAAD8NRvJWrji
__________________
DM7 - Shinoobi Edition || VS2
Reply With Quote
  #18  
Old 01-24-2008, 06:00 PM
king-man's Avatar
king-man king-man is offline
Don't dis spyder cuz ill dis you about your gun
 
Join Date: Mar 2007
Location: Uniontown, KY
Posts: 945
Default Re: More Cocking Problems :(

you'll also need a new front blcok from trinity or an adapter from cp, trinity, or new designz, a new asa doenst hurt but if you use the stock one you have to open it all the way prtty much, My setup, Cp Long Reg w/o gauge: $60, trinity front vs front blcok: $40, There are varieties of ASA's, but i like mine so ND Quik Flip: $30, seeing your buddies goggles splattered with paint: priceless
anyways my setup cost me $130you could nock off 10 more bucks if you get the adapter
Reply With Quote
  #19  
Old 01-25-2008, 02:16 AM
spray and pray spray and pray is offline
Spyder Addict
 
Join Date: Sep 2007
Posts: 940
Default Re: More Cocking Problems :(

my adapter was $17.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 02:40 PM.