On/Off

[Spyder Freak 0915]

Just ordered my new reg

can i use the stock on off with it or do i have to get a new one?

[Doc77]

You need to buy a new on/off ASA because the stock VS2 ASA is also the reg. You will also need new macroline fittings because the stock spyder thread is not metric.

[Spyder Freak 0915]

whats the best on off there is

[sphven]

Custom products has some good on/off's, i really like the 2k5 on/off made by them but here is the new generation of that model

[Doc77]

sphven's recommendation is a good one. I have it and it works great. The macroline fitting can be placed on either the left or right side of the ASA. If you want the fitting to come out of the front then I would suggest the bob long gear drive.

http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=7Cu23Asr4S220Uy_HH52dAGNkuNKKIqa7_4=?Pro ductID=PJXAqArbyR8AAAEQ9Ve_IDcM

[swoosh81]

If going with the BL gear drive check out b/s/t/ in pbnation. A guy is selling them for $35 bnib. I picked up 2 for that price.

[king-man]

you can use the stock one, jsut leave it wide open, i used mine like that for ever and it worked just fine
if you do have the money though i would suggest getting a new one

[Spyder Freak 0915]

how do i leave it wide open?

[king-man]

adjust the stock reg/asa to as high as it will go psi wise, i think it will go to 500psi

[Tech Steve]

you can use the stock asa... all you have to do is take out the reg seat on the piston and there will be no regulation...