pilot bolt in a rodeo

[kramernator]

can i buy a bolt for a pilot (or any top cocking one) and put it in my rodeo?
my plan was to take off that beaver tail, then cut a slit in the top of the gun, where the red line is in the pic below.

(yeah custom paint job)

then i should be able to take the pilot bolt and put it in there, right.
i need to know if the top cocking knob on the pilot bolt and be unscrewed, if it can then i don't need to make the cut all the way out of the back of the gun.

is there anything that would not allow this to happen?

[pb34]

Yes it would fit and yes the knob can be removed. I would suggest making the cut all the way out the back though because it would make bolt removal much easier. Then knob is sometimes a bit of a pain to take out. But yes, it will work you'll just need to cut the right size slot.

[kramernator]

alright, thanks!