Show Your MR1

[deano 177]

Ace24 that looks great. Where does the air feed in?

[TommyRuss]

assuming it's an air-through stock?

[DFSniper]

yep, it is.

[paintballkid0206]

NICE ACE!!!!! a list of mods would be nice. and how much did it cost. once i get a job i might do that to mine, once i get a new hose...

[nixin]

thats awsome !

[pinkanese]

Originally Posted by sqirmymr1

paintballkid0206

--------------------------------------------------------------------------------

silencers are illegal unless you have a permit to have one. i read something about this on Spec Ops paintball's web site. The permit is like $200 or something outrageous like that, but as long as you have a permit, you can have one. do you have a permit for that sqirmrmr1?
__________________

i dont have a permitt but a silencer is legal on a paintball gun in michigan if it is mounted to your gun and cannot be removed without destroying it or something like that... idk but it is legal...and shweet

That is true for most states, but there is a story of ATF takign some guys gun, cutting off the barrel wiht a hacksaw and using to test. Then prosecuting him. Also the MR1 barrel is threaded so therefore it is removable adn could be used. Now then it has been quite a few years since any cases were filed on this subject, so I think ATF may have laxed up a bit, it is a rather ridiculous law ot start with.

Sorry to drag this off topic. I hope to post pics of mine by the first if the year. Oh I can't wait to start modding that bad boy.

[Ace24]

Thats how the air works.

I'll grab my list in a sec.


MR1 - $75
J&J Ceramic 14" barrel - $10
MR3 Rail - $15
RAP4 Airthrough Stock - $30
ACP Bolt $10
Hobby Horse Black Fittings - $16
Single trigger frame from a Spyder Classic - Free
Q-loader system with a couple pods - Free (thanks again PBGrandpa!)
M4 Barrel Shroud and Front sight - $15
Red/Green Dot Sight - Free/on hand from BB Gun that I've had for a few years
2 Rail's for Sight (mounted to MR3 rail) - $3 from local shop bargin bin ($1.50/peice)

Final price, and cutting it close at that, $174.

[pinkanese]

So I take it the hole in the body where to hose connects is standard 1/8 NPT. I am thiking of running a hose similar to that on mine.

[DFSniper]

i would have made the hole smaller so that just the fitting shows (with no wiggle room) but thats just me...

[TommyRuss]

Originally Posted by pinkanese

So I take it the hole in the body where to hose connects is standard 1/8 NPT. I am thiking of running a hose similar to that on mine.

It is, I confirmed this with Kingman tech.