Mr1 problems

[shark]

When i went out to shoot my mr1 during a woods ball game the ball had no velocity at all. i checked the velocity meter on the back of the gun and it was fine, i think this is a simple o-ring issue but if you know differently please tell. Also if you have had this issue before and have any comments

[oldironmudder]

Check your striker o-ring. I had one go bad but not completly go out & a stone stock marker was out shooting my tuned marker.

[paintballkid0206]

take the feedneck off and look to see if the anti double-feed detent is in. one week i went to chrono and that detent waqsnt in there, and the balls would just roll out my barrel. otherwise i would check an o-ring like oldironmudder said

[shark]

alright thanks

[cyberthrasher_706]

You might also want to make sure your bolt is in the right way. The side with the slot in it goes toward the side with the feedneck. If it's not than that means you have the bolt upside down and you're not getting any air through to the painball, relying on the bolt alone to just lob it out the barrel about 3-5 feet.

[shark]

Well i took apart the gun and made sure everything was in the right way and put it back together and now i have the mr1 that i love back. thanks everyone

[paintballkid0206]

that's good. congratulations! lol. the first time i took mine apart, i forgot to attatch the bolt and striker, so it didn't work. but i'm just so smart( )and i fixed it all by myself

[AMP Warrior]

I'll bet
Dont worry i have done the same thing. I took my bolt out, put it back in upside down, started playing, then noticed somthin was wrong

[cyberthrasher_706]

Originally Posted by AMP Warrior

I'll bet
Dont worry i have done the same thing. I took my bolt out, put it back in upside down, started playing, then noticed somthin was wrong

Yeah, we usually park the rigs and unload, get everything ready, then walk to our normal "base camp" with everything ready to go so I was firing a couple of test rounds off, first time using a remote and all and it was doing this same thing. So we got to base camp and I field stripped the hell out of it, somehow missed the upside down bolt the first couple of times I went through and then about 45 minutes later realized the problem. I even went as far as throwing my spare co2 tank and my stock barrel to try finding the culprit. Turns out the culprit was just me and my A.D.D.

[AMP Warrior]

^&*( happens