![]() |
|
#1
|
||||
|
||||
|
http://www.actionvillage.com/is-bin/...UAAAEUyHx41Y8m
* Low pressure valve system that allows the Aura to operate at 150 psi * Low force spring is easy on paintballs and allows the use of more fragile paint * Lower mass internals resulting in reduced recoil * Self lubricating delrin bolt with quick release pin for easy removal. Unique design prevents the paintball from rolling back into the bolt * Sealed breach prevents gas from escaping into the feed tube * Break beam ball sensor is located low in the breach to ensure the paintball has dropped completely into the breach before firing * Dual spring loaded ball detents * Integrated adjustable pressure regulator with built in swivel mounting * Low profile clamping feed neck that accomodates all loaders * Handle frame is equipped with a universal mounting system that allows you to connect dovetail and 3/4 inch pitch bottomlines or drop forwards * On/Off bottom line with purging feature for easy tank removal * 12 inch ported barrel - Cocker threads * High pressure macroline hose * Operates on CO2, Nitrogen, or compressed air * Adjustable trigger with magnetic return * Made from high grade 6061 aluminum * Comes with all hex keys needed to repair the Aura, and a spare parts kit * Firing modes: Semi up to 25 bps, 3 shot burst at 10 bps, full auto at 10bps. Two ramping modes. NPPL and PSP firing modes with tournament lock switch * Adjustable rate of fire * Convenient display of mode, eye function, and alarms through LED panel on the rear of the grip frame * Weight: 2.4 lbs.
__________________
Kid Arguing with his mom on Xbox Live! FUNNY! VS2 Dis/Reassembly Kingman Speedball Club #6 Misc. and Spyder Parts for Sale!!!! New PBN Feedback +36/-0 KUSA Feedback +17/-0 Feedback +70/-0 |
|
#2
|
||||
|
||||
|
looks like like a super scaled down type of ego to me.
this may end up to be something just like the promaster maybe?
__________________
|
|
#3
|
|||
|
|||
|
NICE! That thing looks cool. When did it come out? Sorta looks like a promaster with an ego feedneck.
|
|
#4
|
||||
|
||||
|
don't know... was curious if mokal had made anything new and they did!
__________________
Kid Arguing with his mom on Xbox Live! FUNNY! VS2 Dis/Reassembly Kingman Speedball Club #6 Misc. and Spyder Parts for Sale!!!! New PBN Feedback +36/-0 KUSA Feedback +17/-0 Feedback +70/-0 |
|
#5
|
|||
|
|||
|
Its like the ultimate blow back. I would take one of these over a VS2 if the quality is the same.
__________________
Stock ZAP AMP generator with polished valve assembly Spyder Victor with a modded CORE derlin bolt, polished striker and polished valve assembly BEING POOR SUCKS |
|
#6
|
||||
|
||||
|
is it a blowback? thought i'd be a fasor
__________________
Kid Arguing with his mom on Xbox Live! FUNNY! VS2 Dis/Reassembly Kingman Speedball Club #6 Misc. and Spyder Parts for Sale!!!! New PBN Feedback +36/-0 KUSA Feedback +17/-0 Feedback +70/-0 |
|
#7
|
|||
|
|||
|
I think its EP...
|
|
#8
|
||||
|
||||
|
Not fully EP -
* Low force spring is easy on paintballs and allows the use of more fragile paint * Operates on CO2, Nitrogen, or compressed air Could be a FASOR, what with pressure being 150 psi. But, this part tells me it's probably a blowback: * Lower mass internals resulting in reduced recoil Looks like a Promaster to me. I don't know, it seems pretty decent with the breakbeam eyes, cocker threading, clamping feedneck, board with the modes and magnetic trigger...
__________________
Pressing on
Never argue with an idiot; they'll drag you down to their level and beat you with experience." ~ Anonymous |
|
#9
|
||||
|
||||
|
No. Mokal will never make a comeback, they were never big therefore they can't be big again
|
|
#10
|
|||
|
|||
|
promaster clone
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|