|
|
#1
08-30-2007, 03:17 PM
|
||||
|
||||
MR2 bolt
here's the bolt that came with the MR2...I did the -break in- to the bolt....na na didnt work NADA. it spit out the first one...then some good 10 shots then exploted one...re-cok...then same thing but then it just exploted like 2 then shoot goood---frustrating...i guess im gonna have to get a new bolt....
uhmm any advice? 
|
|
#2
08-30-2007, 03:28 PM
|
||||
|
||||
|
Re: MR2 bolt
whats exploted? you mean it chopped? what hopper are you running?
as for a bolt id suggest an acp 2 oring bolt, they arent expensive and good for the price
__________________
|
|
#4
08-30-2007, 03:43 PM
|
||||
|
||||
|
Re: MR2 bolt
the acs bolt sucks, but if you dont have a fast hopper you might still get chopping problems from the new bolt,
i use the acp bolt too, it does chop every now and then when iran an eggy II, but no more annoying jams and recocking, and less blowback from the acp bolt
__________________
|
|
#6
08-30-2007, 04:01 PM
|
||||
|
||||
|
Re: MR2 bolt
I wouldn't have gone and gotten a new bolt so fast. Are the balls breaking in the firing chamber or in the barrel? If it's the barrel your chopping paint because of a bad paint to bore match. Another thing, I would have gotten one of the regular 2 o-ring ACP bolts as opposed to the low blow. Many people have had some problems with the low blow and you will most likely have to buy a spring kit to tune your gun correctly. That being said, I've also heard some people say that with a little tuning the low blow works great. So you will get to experience that first hand.
Edit: Also are you sure you broke in the ACS bolt enough?
__________________
Almost finished LP Pilot <<XX PILOT OWNERS CLUB # 36 XX>> The Official Manual Thread Spyder Feedback PBN Feedback
|
|
#7
08-30-2007, 04:15 PM
|
||||
|
||||
|
Re: MR2 bolt
a regular 2 oring bolt would of suffice, and eggy 3 is good, you should see a difference in blow back after installing the bolt
when i ran the eggy II blow back was horrible, i ran into nothin but chopping issues, but after a newbolt the blowback was alright and the hopper kept up alright
__________________
|
|
#9
03-15-2008, 08:13 AM
|
||||
|
||||
|
Re: MR2 bolt
He doesnt have his gun anymore he sold it.
__________________
General Shawn Wayne Tetz, Commander 187th Gaurds Mechanized Rilfe Division. - Includes the 3rd armored brigade from the 34th Gaurds Armored Division. (APC's and armor as well as support elements) -UCSF Armored Division Commander Armored Units -Deep insertion APC -Killer "B" Battle Tank -Troop Transport APC (almost done) -Gun Truck heavy support unit (In the works) -Order of Lenin (1st) -Skyline Sergeant -YGP Rep! -Sector 4 team feild honor recipiant (UCSF)
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
