I'm looking for some parts

[Nordic1]

Originally Posted by Kenny_McCormic

actually hpa is just as cheap in bulk minus the initial investment of the scuba tank and hpa tank

Where'as I already have 32oz Co2 paintball tanks, 20lb Co2 Tank, Fill Kit and access to contractor fill rates at the local AirGas... lol

I appreciate the input (I looked this stuff up awhile back) I'm just looking to get my gun working for weekend splatter-fests without sinking a ton of coin into my gun

[Kenny_McCormic]

then get/make an anti siphon along with the palmer reg it will perform like its on hpa

[Nordic1]

Originally Posted by Kenny_McCormic

then get/make an anti siphon along with the palmer reg it will perform like its on hpa

I don't know how familiar you are with Co2 (no offense meant) but in liquid form, its about 800Psi which is what regular HP Co2 guns operate at. When Co2 expands, ie from 800psi to 350 psi (what I had), the temperature of the gas drops. In my case, 8 or 12 shots, the Co2 temperature drop was enough to seize the regulator (frozen) until the reg warmed back up.

An anti-siphon should keep liquid Co2 out of the gun but it won't really combat my freezing problem.

However I do totally appreciate the input... I'm just looking to revert my gun back to stock-ish.

[HelpDeskHustler]

http://www.actionvillage.com/is-bin/...nd-accessories

stock parts^^

if you can contact Kingman (if), they are actually very friendly and the prices generally are pretty cheap, but it took me like an entire week to get through their phone system to somebody.

[Nordic1]

Originally Posted by HelpDeskHustler

http://www.actionvillage.com/is-bin/...nd-accessories

stock parts^^

if you can contact Kingman (if), they are actually very friendly and the prices generally are pretty cheap, but it took me like an entire week to get through their phone system to somebody.

awesome thanks man