![]() |
|
#1
|
||||
|
||||
|
I did some searching but found nothing that answered this
Ok im gonna buy a new hopper, Its between these (posted are also The prices in South african Rand) Spyder Fasta 18v LED (30bps??? Is it True?) R900 VLocity Junior (20 BPS) R750 Eggy 3 (23BPS) R900 ReVLution Eye Force (20bps) R700 The Fasta looks like its going to win with the 30BPS. But is that true. Also i see that that the racetrack leading to the marker is like an s shape and not straight with a drop into the marker. Does this give make it feed less. Is it durable. Does it have eyes thanks for the help
__________________
Spyder Pilot ACS 12oz CO2 (soon to be 48ci/3000psi tank) Gravity Hopper (soon to be VL VLocity Jnr) |
|
#2
|
||||
|
||||
|
The Spyder Fasta Will Do 30+ Balls Per Second. It Is A very Durable Hopper and Very Efficient. The Fasta Hopper Does Not Have Eyes. I'm Pretty Sure Of That. And The S Shape Feed Does Not Make It Feed Less.
__________________
SOC FeedBack +11/-0 PbNation Feedback +6/-0 [FS/T]Core2Quad Rig *!VS2 Owners Group!* From PbNation "This forum requires that you wait 30 seconds between searches. Please try again in 32 seconds." |
|
#3
|
||||
|
||||
|
so does it just carry on feeding (even if the raceway is full) or does it know when to stop.
I dont want the hopper to turn into a blender
__________________
Spyder Pilot ACS 12oz CO2 (soon to be 48ci/3000psi tank) Gravity Hopper (soon to be VL VLocity Jnr) |
|
#4
|
||||
|
||||
|
Vlocity Jr. is the best of the ones you have listed.
__________________
It always seems impossible until its done.
- Nelson Mandela |
|
#5
|
|||
|
|||
|
of those i would go with the egg. your never going to shoot 30 pbs outside of some ridiculous ramp. I personally have a Halo B with rip and have never had any troubles with it not feeding fast enough. i haven't used a fasta, but the drive 'cone' doesn't look very good to me. I would imagine it has a pressure switch that shuts it off when the neck is full.
|
|
#6
|
||||
|
||||
|
the fasta is activated by a small peice of thin brown plastic that looks like film. it hangs into the feedneck and when a ball hits it, the motor spins. It is a very effective method.
i can make a drop test vid if you like. I like the fasta but id probably get the egg. p.s. i just found a reloader B w/ rip drive on ebay stores, buy it now for $70! http://cgi.ebay.com/Reloader-B-Paintball-Loader-Halo-Rip-Drive-Odyssey_W0QQitemZ330110204266QQihZ014QQcategoryZ71 157QQtcZphotoQQcmdZViewItem Last edited by Oscum Guy : 06-25-2007 at 07:30 AM. |
|
#7
|
||||
|
||||
|
Prob is that im in South Africa. The Halo no rip with belt drive is $170.
Thats how bad/expensive it is here in SA. The prices i posted are the Prices i get them here. The Vlocity Junior is the only one which has the same price as you guys in USA the rest are WAY more expensive
__________________
Spyder Pilot ACS 12oz CO2 (soon to be 48ci/3000psi tank) Gravity Hopper (soon to be VL VLocity Jnr) |
|
#8
|
||||
|
||||
|
Then definetly go with the Vlocity. By the way you are very lucky, I visited South Africa and it was my favorite country. I plan to study abroad there.
__________________
It always seems impossible until its done.
- Nelson Mandela |
|
#9
|
||||
|
||||
|
ima post the fasta vid anyway.
http://www.darksidevideo.org/video/1...58011e259b.htm |
|
#10
|
||||
|
||||
|
Get the vlocity Jr., if your still not satisfied then you can get the gangster chip for ~$35 and it will run with, if not out run most higher end loaders. And oh BTW, I don't care what anybody says the fasta doesn't feed at 30 bps, free-fall maybe but there is a big difference between free-fall and on marker speeds.
The fasta is a good durable loader but advertised and actual are 2 different things. Show a goldwave of it and I'll eat my words.
__________________
Never go Bear hunting without a sandwich...sandwich: someone you can out run or don't mind shooting ![]() Angel 1 Non-SOM Apr 07 Ripper 3 Non-SOM Apr 08 Family Photo My Feedback |
![]() |
| Thread Tools | |
| Display Modes | |
|
|