VS1 feedneck, threads same as VS2, Ion etc.

[SparkyGT]

are the vs1 feedneck threads same as the VS2, Ion, Impulse?

[NeedForSpeed]

Tehy are the same as the VS2 and all other spyder guns but not the ion or impulse

EDIT: wow, I was thinking barrel. I guess I can't read. my bad. finals fry my brains

[clickclicksplat]

Originally Posted by NeedForSpeed

Tehy are the same as the VS2 and all other spyder guns but not the ion or impulse

Dude... the VS2/3 feedneck is Ion/Impulse threaded, meaning it takes feednecks that fit the ion and the impulse. It isn't Spyder threaded, despite the fact that it's a spyder.

As to the question asked in the OP, I have no idea.

[SparkyGT]

going to take one out tonite or this weekend, will find out then, think ihave some piranha/ion necks kicking around

[Theheroguy]

Originally Posted by NeedForSpeed

Tehy are the same as the VS2 and all other spyder guns but not the ion or impulse

wow just wow

but yeah it should be I didn't know that any other spyders were threaded on the feedneck

[pugster]

the feedneck on my VS1 isnt screwinng out. is it suppoised too?

[Nintendo]

try heating the feedneck with a hair dryer for like 4-5 min then try twisting it off
o n use like a towel or something so u dont burn yourself

[sparx17]

Originally Posted by pugster

the feedneck on my VS1 isnt screwinng out. is it suppoised too?

Try to get a hold of a strap wrench...it works great when you dont want to scratch things up using pliers.

[SparkyGT]

my strap wrench didnt work, even after heating with my micro torch, this thing was a pain compared to the timmies and piranhas that i had to take off, and i've done 6 of them. I ended up having to use vise grips, and thick rubber sheet i cut up, didnt scratch it, but thought i had bent it, when i let go of the visegrips it was still round.


REMOVE THE EYES, COVERS, DETENTS, BOLT WHEN HEATING UP, YA DONT WANT TO DAMAGE THEM